amg performance media
Does anyone know where this data/program is actaully stored? Is it in the actual ecu? Media interface module? Somewhere else? I highly doubt it would be as easy as swapping some type of module and adding the little amg button...probably need quite a few wiring harnesses as well

Im seeing a totaled 507 coupe completely dismantled with tons of parts for sale. I ran the vin and it has lots of nice options. I was lucky enough to grab all the oem interior carbon fiber parts for a steal of a price




Trending Topics
the parts do cost a lot,a core module is needed which mb raised price to 2xxx bucks recently ,and you have to source the button and wiring harness
the installation is very straight forward,mount the module under ur passager footrest floor,power wire to ur fusebox,wire to ur car CAN B and CAN E and rewire ur command video to mediabox as well as menu dials
the amg performance me diabox will take over the command video source and output video signal to mainscreen,it will be activated via amg button on ur center console and u have to trigger it via xentry
The Best of Mercedes & AMG
the parts do cost a lot,a core module is needed which mb raised price to 2xxx bucks recently ,and you have to source the button and wiring harness
the installation is very straight forward,mount the module under ur passager footrest floor,power wire to ur fusebox,wire to ur car CAN B and CAN E and rewire ur command video to mediabox as well as menu dials
the amg performance me diabox will take over the command video source and output video signal to mainscreen,it will be activated via amg button on ur center console and u have to trigger it via xentry
Do you have a list with part numbers ??? Can you PM me.
the parts do cost a lot,a core module is needed which mb raised price to 2xxx bucks recently ,and you have to source the button and wiring harness
the installation is very straight forward,mount the module under ur passager footrest floor,power wire to ur fusebox,wire to ur car CAN B and CAN E and rewire ur command video to mediabox as well as menu dials
the amg performance me diabox will take over the command video source and output video signal to mainscreen,it will be activated via amg button on ur center console and u have to trigger it via xentry
Do you know if this performance media is compatible with pre-facelift cars?
According to your photo, your menu is in chinese. Are you located in China? I'm in Shanghai
Kosmos, was it a plug and play solution, or did you need to cut and run wires.
I would think that the standard harness would have all the wiring in place. You should just need the control module, additional wiring harness to the box, the AMG button.
Kosmos, was it a plug and play solution, or did you need to cut and run wires.
I would think that the standard harness would have all the wiring in place. You should just need the control module, additional wiring harness to the box, the AMG button.
the wire is p&p, CAN bus socket is existing, no cut is needed unless when you install the USB wire onto your glove box, you have to cut a square to fit in the USB socket but that's all








Last edited by Brasilianer87; May 11, 2017 at 01:26 PM.






