need help
#1
need help
Tried installing my Mode Carbon P31 diffuser this morning and trying to determine if its installer error or a fitment issue. after i got it all together i noticed that the tabs on the diffuser towards the ends have not seated and no matter how much pressure i can’t get them to lock, have i done something wrong or should i contact Mode Carbon for a fitment issue?
#2
MBWorld Fanatic!
Joined: Jun 2008
Posts: 8,068
Likes: 2,849
From: Los Angeles
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
That looks fine. It’s never going to lock like the OEM piece. Put some silicone sealant in there and clamp it overnight, or fasten with screws.
#3
MBWorld Fanatic!
Joined: Feb 2010
Posts: 5,519
Likes: 434
2012 C63;1971 280SE 3.5(Sold);2023 EQS 450 SUV 4 Matic (Wife's)
When the body shop installed mine they took the bumper off the car. You might have to do that to get all the tabs to seat. Anyway it does look fine the way it is. On my 2010 I never did get all the tabs to seat properly but it looked fine. Vorsteiner diffuser though not a Mode diffuser.
#7
MBWorld Fanatic!
Joined: Jun 2008
Posts: 8,068
Likes: 2,849
From: Los Angeles
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
I know, the suspense is killing me too! Did he or didn’t he use screws or silicone? Did he get the bumper cover off successsfully? This is INSANE?!?!?!?!
The following 2 users liked this post by BLKROKT:
AMG3.2 (07-16-2018),
Duffer4126 (07-16-2018)
Trending Topics
#9
So I finally finished installing the Mode Carbon diffuser, i chose to take the bumper off to get the tabs to click in. Removing the bumper wasn’t to difficult, the only thing I had to do was shave down a few tabs on the bumper and it snapped into place...no adhesive or screws.