Phil1305 C63 Progress/Mod Thread
#51
Senior Member
Thread Starter
Well, had some free time today so I got my car apart to see what type of carnage I caused. She sure did twist right apart!!! And there it sits probably for the rest of winter as the new carbon driveshaft is 6 weeks out.
#53
Senior Member
Thread Starter
Driveshaft came in and had time over the weekend to install it and test it out. It makes a difference for sure but not sure yet how much, could just be I haven't driven my car in a month. But very happy with it for sure.
#54
Senior Member
Thread Starter
well some goodies came today!! Weistec stage 3 with gen 4 blower. Heat exchanger is backordered, also im waiting for a few other things.
Current projected mods:
Weistec Stage 3
trunk ice tank
ID1050x injectors
(2) e5lm fuel pumps
-10 fuel feed line
-6 return line
ID fuel filter
meth injection
Syvecs S7+ plug in standalone
E85 flex fuel
Right now i will be installing the weistec and getting a trunk ice tank, for the time being. After all the craziness settles down i will continue with standalone and custom fuel system.
few pics of the weistec laid out
I am also waiting aluminum valve covers that i purchased and waiting for them to get powdercoated as well. The theme i will be going with is candy blue, only the covers will be done right now. later on i will rebuild the brake calipers and do those the same color as well.
pics of previous projects done the same color on wifes evo
That's it for now as waiting for the heat exchanger and ice tank to show up before install begins.
Current projected mods:
Weistec Stage 3
trunk ice tank
ID1050x injectors
(2) e5lm fuel pumps
-10 fuel feed line
-6 return line
ID fuel filter
meth injection
Syvecs S7+ plug in standalone
E85 flex fuel
Right now i will be installing the weistec and getting a trunk ice tank, for the time being. After all the craziness settles down i will continue with standalone and custom fuel system.
few pics of the weistec laid out
I am also waiting aluminum valve covers that i purchased and waiting for them to get powdercoated as well. The theme i will be going with is candy blue, only the covers will be done right now. later on i will rebuild the brake calipers and do those the same color as well.
pics of previous projects done the same color on wifes evo
That's it for now as waiting for the heat exchanger and ice tank to show up before install begins.
#55
Senior Member
Thread Starter
Got my PNR welding 5 5 gallon trunk ice tank. Using a davies craig 150 pump.
Still waiting on the heat exchanger from weistec as its back ordered.
Still waiting on the heat exchanger from weistec as its back ordered.
#57
Member
https://killerchiller.com/products/m...r-turbocharger
#58
Senior Member
Thread Starter
Phil since you are going the ice tank route, have you considered with a killer chiller gen 3 kit? You would repurpose the ice tank as an auxilary tank for the gen 3 killer chiller kit. I too bought the a weistec supercharger kit. The heat exchanger is back ordered so i ordered this.
https://killerchiller.com/products/m...r-turbocharger
https://killerchiller.com/products/m...r-turbocharger
#59
Member
#60
Senior Member
Thread Starter
#61
Member
The following users liked this post:
Phil1305 (04-21-2020)
The following users liked this post:
Phil1305 (04-22-2020)
#65
Senior Member
Thread Starter
Come winter or when it takes a **** it'll get a weistec bullet proof build,, or if i find more info on what they do, i may just get the exedy clutch kit and rebuild it with my buddy who's a master Mercedes tech.
But right away the only thing I will be doing is a service to it with filter and fluid etc. car has like 32k on it so its time..
At first I'm just slapping the blower on with 67mm pulley on weistec 93 tune for summer, i am slowly gathering the rest of the stuff for the fuel system for hopefully fall to do the standalone and e85. So right away I'm hoping for 680whp but it'll probably be more like 630ish I'm guessing.
All said and done with e85 and meth I'm going for 750whp +
Last edited by Phil1305; 04-21-2020 at 02:20 AM.
The following users liked this post:
mcderpa (04-21-2020)
#66
Senior Member
Thread Starter
No plan to right now, I do eventually want to but if the aussie guys are doing 140 mph+ on cast motors my p31 should be good for a while. But one day I will upgrade unless for some reason I'm forced to early. Lol
The following users liked this post:
mcderpa (04-21-2020)
#67
Senior Member
Thread Starter
although not a very near future upgrade, I do believe I will be putting a 100 shot of nitrous in place of the meth before the blower but thats not anytime soon. But I'm not going to lie, I really wanted to soray the **** out of this thing before I went FI so itll just have to get added in the future I guess.
The following users liked this post:
mcderpa (04-21-2020)
#71
Senior Member
Thread Starter
Well my new to me aluminum valve covers showed up today. Have to get them dropped off to the powder coaters asap to get coated. Since I'm over the top as usual, I will be ordering 12 point SS bolts for the cover hardware for some bling factor.
The following 3 users liked this post by Phil1305:
#72
Senior Member
Thread Starter
But I will be logging everything once the e85 is in order. Because I'm going standalone at the same time for true flexfuel capability. So we'll see what data we gather when that time comes.
#73
Skip the meth and spray some NOS 35hp each side
#74
Senior Member
Thread Starter