C63 AMG Oil Cooler solution! Reasonable 44O option!
#101
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,067
Received 2,849 Likes
on
1,680 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
I’m sure you could mount this horizontally to leave room for all the other stuff you have crammed in front
#104
Super Member
Join Date: Mar 2019
Location: Bondi Beach , Australia
Posts: 515
Received 125 Likes
on
111 Posts
2013 W204 C63 AMG P31 Estate wagon
Just received my larger cooler, shroud and lower ducts today from SRG_C63, great work.
Took a while because of problems with post due to Covid19 but finally arrived.
Unfortunately won't be fitted until mid to late August at this stage.
Will try to remember to document fitting with pics and do before and after testing.
Thanks again SRG_C63.
Took a while because of problems with post due to Covid19 but finally arrived.
Unfortunately won't be fitted until mid to late August at this stage.
Will try to remember to document fitting with pics and do before and after testing.
Thanks again SRG_C63.
The following 3 users liked this post by Cwagon:
#109
Is it fit maybe for the 212 series E63 with M156 engine? The original oil cooler part number is A2095000100 for both C/E63 with M156. I think must be fit on. Just another thing, now you have more experience at the sommer time. Is not weaker the A/C? Last friday I was on the Nordschleife too
Last edited by Formaster; 07-07-2020 at 05:59 PM.
#110
Member
Thread Starter
Just write me a Personal message.
I had a customer who bought a cooler for his W212 M156.
Wanted to confirm if it’s fit, but never heard anything back. I think that’s a good sign.
But you are right, I looked at the Parts Catalogue and it should fit for 99%!
Is it fit maybe for the 212 series E63 with M156 engine? The original oil cooler part number is A2095000100 for both C/E63 with M156. I think must be fit on. Just another thing, now you have more experience at the sommer time. Is not weaker the A/C? Last friday I was on the Nordschleife too
Wanted to confirm if it’s fit, but never heard anything back. I think that’s a good sign.
But you are right, I looked at the Parts Catalogue and it should fit for 99%!
Last edited by SRG_C63; 12-20-2020 at 04:33 PM.
#112
#114
MBWorld Fanatic!
Join Date: Mar 2010
Location: Land of mountains, cheese, chocolate and watches
Posts: 5,695
Received 267 Likes
on
225 Posts
12' W204 C63 AMG coupe "T-Rex", 12' W451 Smart Fortwo Pulse (99' W202 C43 AMG sold)
I sent him a pm recently but haven't received a reply to date. We have had an exchange of message in the past, so hopefully message didn't pass into a spam folder. He could be on vacation or test driving a new version....
#115
Member
Product Review:
After 2 months of having this fitted, i can honestly say that the oil temp has been greatly maintained at lower temp.
I am running ESS tuning Supercharger. These uprated oil coolers fits in place of oem cooler without any need for modifications. Fits to the back of the ESS intercooler using ESS brackets.
Mine is a 2013 facelift Saloon.
In 32C ambient temp yesterday, motorway runs maintained between 103-105.
Few bits of WOOT & town driving in S+ transmission mode only sees oil temp risen to 112C max.
Well pleased with this. Definitely worth it!
Will update more when i run Vmax200 event on 22nd August with multiple 1.2mile runs hitting 200mph.
After 2 months of having this fitted, i can honestly say that the oil temp has been greatly maintained at lower temp.
I am running ESS tuning Supercharger. These uprated oil coolers fits in place of oem cooler without any need for modifications. Fits to the back of the ESS intercooler using ESS brackets.
Mine is a 2013 facelift Saloon.
In 32C ambient temp yesterday, motorway runs maintained between 103-105.
Few bits of WOOT & town driving in S+ transmission mode only sees oil temp risen to 112C max.
Well pleased with this. Definitely worth it!
Will update more when i run Vmax200 event on 22nd August with multiple 1.2mile runs hitting 200mph.
The following users liked this post:
SRG_C63 (09-02-2020)
#116
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,067
Received 2,849 Likes
on
1,680 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
1.2mi runs.... you must be doing Vmax @ Bruntingthorpe then? Used to do that all the time, great crew. Enjoy.
#118
MBWorld Fanatic!
Join Date: Jun 2008
Location: Los Angeles
Posts: 8,067
Received 2,849 Likes
on
1,680 Posts
2012 P31 C63 Coupe Trackrat, 2019 GLE63S Coupe Beast
Awesome, enjoy man. Last time I was at Brunters I went 206 in my 996TT. Think that back straight was closer to 1.6mi. And I still represent.
#119
MBWorld Fanatic!
Join Date: Mar 2010
Location: Land of mountains, cheese, chocolate and watches
Posts: 5,695
Received 267 Likes
on
225 Posts
12' W204 C63 AMG coupe "T-Rex", 12' W451 Smart Fortwo Pulse (99' W202 C43 AMG sold)
PH Smiley
The following users liked this post:
BLKROKT (08-10-2020)
#123
Member
Big Thanks to Srg_C63
Sven (SRG_C63) was great to work with in purchasing this directly from him. He was extremely responsive to private messages and accurate in his timelines. I purchased back in early June, took about 2.5 weeks to make/ship out of Germany due to early slowdowns of Covid. I received the cooler approximately 2 weeks later and it was superbly package without any damage issues. Took me a little longer to get on the car as I had to deal with dead battery, stripped voltage regulator screws, R&R the alternator/VR, and everything in between that process.
As you can see old vs new there is a sizable difference. Fit and finish is superb and looks OEM.
Fitment was great, only slight modification needed to mounting holes (as described in thread). I have not had a chance to get to a track to test out the true capability of this cooler, but will be doing so hopefully very soon. Even just driving around in normal conditions/traffic, this definitely seems to keep things cooler (nothing over 210 F in hot/humid August weather in DC) and I have no doubt it will do it's job on the track. Much Thanks to Sven!!
As you can see old vs new there is a sizable difference. Fit and finish is superb and looks OEM.
Fitment was great, only slight modification needed to mounting holes (as described in thread). I have not had a chance to get to a track to test out the true capability of this cooler, but will be doing so hopefully very soon. Even just driving around in normal conditions/traffic, this definitely seems to keep things cooler (nothing over 210 F in hot/humid August weather in DC) and I have no doubt it will do it's job on the track. Much Thanks to Sven!!
#124
Member
Thread Starter
Thank you for this positive feedback. This is what drives me to keep going!
If there are more people interested, just write me a message
If there are more people interested, just write me a message
Last edited by SRG_C63; 12-20-2020 at 05:46 PM.
#125
Member