Team@Rebellion

Stunning 2015 Mercedes-AMG Edition 1 C63S came in for Reinstall and dyno of Rebellion Stage 1 Plug and Play today.

Customer is delighted and happy to be ‪#‎TeamRebellion‬ again!

Stock - 539bhp 524ftlbs
Tuned - 603bhp 640ftlbs







Contact info@rebellionautomotive.co.uk to purchase or for more info.

Parkol8088

Is this plug n play? Like a piggy back?
And if in future a change of the front pipe and exhaust will there be any affects?

Yogibara

Ugh, when did pin striping (or whatever it's called) come back in style? It's a good thing that car looks so darn good.

AMG_Eric

how much? renntech is the least expensive chip at $3500

abcut973

Yes a piggyback tune. They have it for the E63 too.
I didn't know this system was back either. It is not like no one can't crack these MB ECU

Team@Rebellion

Hi Guys,

Yes this is Piggy back, currently on offer for £650($929USD) Plus Shipping.

http://store.rebellionautomotive.co....em-sale-price/

Haha yes its a good looking car !

This can be run with downpipes if wanted but bare in mind we can't turn off the second 02 sensors via piggy back.

For that you will need to go to our ECU Map.

PA11LDH

Can you advise how this is fitted, you mention 15mins fitting time?


Do you have a link to any pdf instructions or web site?


Also, is this invisible? Would Mercedes be able to tell if the system has been fitted?


Also, what performance/gains does it make to a stock 2015 C63 (non S model) - sorry for all the questions!

Team@Rebellion

Hi,

This system connects to the Camshaft sensor, 2 x MAP Sensors and 2 x Boost Sensors.

Install will take around an hour as it is tricky to get to. All plug and play so no splicing wires etc.

When removed there is no trace left on the car so can't be detected.

You would achieve around 545BHP and 785nm.

Hope that helps,

PA11LDH

Ah ok, your website quotes 'Full instructions are included and will take approximatly 15min to install.'


Can I see a copy of the instructions please? I am seriously thinking about purchase but install time could well be an issue as I would want to remove before it goes into the dealership for work and re-install again afterwards


thanks


Paul

RDOCA

So let me get this straight.
This is a C63S which factory shows at 503HP at the crank and 516ftlbs of torque.
On your dyno your get 539hp and 524 ftlbs for this stock car.(which sounds about right)as I have seen several numbers at the wheels of about 475hhp.
After your stage 1 piggyback install the numbers at the crank go to
603HP and 640ftlbs.
Please confirm that I have this correct.
thanks
So the tune gives 64HP increase and 116ftlbs at the crank.

AMG_Eric

So everytime we do service we have to remove it?

cyberorth

Pardon my ignorance. I am seeing this as confusing the ecu in allowing timing and boost levels that it does not allow under stock conditions, rather than an actual tune.

deadlyvt

You have it right, That's the definition of a piggy back 👍

Team@Rebellion

Yes the piggy back alters the information in-between the ECU and the Components. This is how it remains un detetectible when removed.

Depending on how well you know your dealer I would recommend removing it before dealer visits.

PA11LDH

Can I have a link to the fitting instructions please - really keen on this

Team@Rebellion

Sure thing, Head to our page and look for the C63 /C63S instructions on the left.

http://www.rebellionautomotive.co.uk...ructions/c1y78

PA11LDH

Thanks for that! Does seem quite difficult/fiddly to get to all the connectors - Also, have you got any pics of where all the wires route in the engine bay and where the main module sits?

Team@Rebellion

Yes certainly.

It is a little tricky but with a little time you will get it in.



Here is a picture of one half way through tidying the wiring. You can see the small wires just behind the radiator fan. Once you tidy it away it is hard to spot.

Team@Rebellion

More kits are back in stock in stock and ready to ship !

callmiro

Great solution and an awesome price for huge gains.

Will definitely order one as soon as my car is delivered.

Team@Rebellion

Awesome ! We will be ready

ssul12

Any deals on this tune still? PM me prices to the US please

AMGTown

Has anyone else seen stock numbers this high?

RDOCA

I think that is at the Crank and yes I think that is about right.


WHP in several dyno runs has been 469-479 so using 475 and a 12% parasitic loss it is 539HP at the crank.

Team@Rebellion

PS guys use code MB63 when you order for 10% off !