When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi guys this probably has been asked before, but I can get my hands on a set of coupe 19/20 black multi spike rims. I’m just concerned about the offset on the front rims, do you guys think it will be fine. What size tyres do you recommend for the front I was thinking 265/35/19 and on the rear going 295/30/20. What do you guys suggest as the car is standard, I’m mainly thinking of going to the coupe rims just to get larger tyres on the rear for more grip as I’m going tune and down pipes soon as I’m struggling with grip stock on the 265/35/19 super sports
one thing's for sure, you can go up to 285/35 on the rear stock wheels. my wheels are stock and I went 285/35 r and 265/35 f and its a massive improvement !
Hi guys this probably has been asked before, but I can get my hands on a set of coupe 19/20 black multi spike rims. I’m just concerned about the offset on the front rims, do you guys think it will be fine. What size tyres do you recommend for the front I was thinking 265/35/19 and on the rear going 295/30/20. What do you guys suggest as the car is standard, I’m mainly thinking of going to the coupe rims just to get larger tyres on the rear for more grip as I’m going tune and down pipes soon as I’m struggling with grip stock on the 265/35/19 super sports
Did you end up getting the couple wheels on your sedan?
Did you end up getting the couple wheels on your sedan?
How did it turn out?
i'm no expert and i'm a month into ownership. But i've been looking at wheels too, and as far as i understand its the front that you cannot go with coupe wheels on. Every wheels guy/gal that i've talked to has told me that it's a no-go from coupe-to-sedan. Might just be cuz they're trying to sell me wheels, but i ended up going with:
Vorsteiner
(F) 20x9 -- 245/30/20
(R) 20x10 -- 285/30/20
Will let you know how it goes once they arrive if you're interested.
sedan: 8.5Jx19 ET38 / 9.5Jx19 ET56
coupe : 9Jx19 ET25 / 10.5Jx20 ET57
Fronts probably won't work. 18mm(ET) + 6.35mm(1/4") = 24.35 mm further out
Rears should be ok. 1mm(ET) + 12.7mm(1/2") = 13.7mm further out. 11.7mm further in.
The only way you'll fit a 295 ( if you can ) is running a 25 series tire..... A 30 probably won't work . The 25 diameter is smaller and you'll need that to clear, The problem with the sedan is the tire usually hits the rear bumper cover right where it joins the 1/4 panel and there is a tab on the inside it will rub . This also depends on if you are lowered and how low you are . I'm was running 20x10.5 +50 w/ a 285/30/20 and it hit on bumps / dips . I than went to a 20x10 +57 and I just have enough room and I am lowered . Fitting the 295 is going to be tight but it will have to be a 25 series , 305 forget it unless your stock height
The only way you'll fit a 295 ( if you can ) is running a 25 series tire..... A 30 probably won't work . The 25 diameter is smaller and you'll need that to clear, The problem with the sedan is the tire usually hits the rear bumper cover right where it joins the 1/4 panel and there is a tab on the inside it will rub . This also depends on if you are lowered and how low you are . I'm was running 20x10.5 +50 w/ a 285/30/20 and it hit on bumps / dips . I than went to a 20x10 +57 and I just have enough room and I am lowered . Fitting the 295 is going to be tight but it will have to be a 25 series , 305 forget it unless your stock height
I run a 295 on stock wheels and lowered with KW V3 Coilovers. Lol
I think the sidewall is going to really hang out on the front ,maybe a 1/4 -1/2" depending on what tires you go with and the size of the bead protector
Had the factory coupe tyre fitted back on the wheel yesterday to trial fit - Continentals 255/35/19 I think.
If the wheels/tyres fit, which I think they will, I’ll fit my 265/35/19 PS4S on them.
Having a hard time sourcing a used or dead 295/30/20 for trial fitment purposes, I don’t really want to go and buy two new tyres to find out they don’t fit.
So so if there’s anyone in Brisbane following this thread who has a spare or dead 295/30/20 pm me if I can borrow it for a couple of days.
285/30/20 is factory I think but I really need a 295 as this is what I want to run.
I think the sidewall is going to really hang out on the front ,maybe a 1/4 -1/2" depending on what tires you go with and the size of the bead protector
My 265/35/19’s I have fitted to my factory 8.5’s fit really well so I’m hoping they will fit better on the 9” wheel.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
