Installing the BMC filters
10-16-2007, 11:11 AM
#1
Senior Member
Thread Starter
Join Date: Oct 2006
Posts: 290
Likes: 0
Received 16 Likes
on
11 Posts
2018 Mercedes E63 S, Boring SUV, 2015 CLS63 AMR Stage 1 (traded), 2015 Audi S8 w/ APR stage 2 (sold)
Installing the BMC filters
Ok, I finally got the filters from Adam for my CL600. Unfortunately, I don't know how to put them in. Does anyone know how to install? Please don't laugh; I know this is probably a easy thing to do, but I'm not very good with mechanical stuff.
Thank you
Thank you
10-16-2007, 03:23 PM
#2
MBWorld Fanatic!
Join Date: Aug 2003
Location: In my garage
Posts: 8,549
Received 1,067 Likes
on
856 Posts
E55, GLS450, GL63, GLE350
Take the front and rear engine covers off. Each side airbox is held on by 6 or 7 t-? screws. Loosen those screws and pull the top off each side and install filters.
10-17-2007, 10:01 PM
#4
MBWorld Fanatic!
Jim is right on. You do have to remove the engine covers to reach the airboxes. The cover of the airboxes can be removed by using a torx screwdriver. Pretty straight forward from there on.
I will try to take some pics and post online.
Cheers
Adam
I will try to take some pics and post online.
Cheers
Adam
10-18-2007, 08:23 PM
#5
Super Member
The only thing to double check when installing the filters is the rubber rectangle has a tendency to want to fall in the hole as you are installing them. You will understand when you take the old paper filter out. Just double check that everything is nice and stable before you put the cover over the new filter. The torx bit is T-20 I think. I used a torx screwdriver that I have had for years.
10-18-2007, 08:27 PM
#6
Senior Member
Join Date: Oct 2007
Location: Northern Virginia
Posts: 344
Likes: 0
Received 0 Likes
on
0 Posts
Big and Heavy 03 CL
BMC filters
I have been researching trying to find the best way to improve the intake of my CL. Are the BMC filters that much better than the K&N or others? And does the the Carbon Dynamic Airbox fit the 500 or just 55? I am new to the forum and have lots of questions seeing as how I have owned my first MB for 5 months.
Trending Topics
10-24-2007, 12:59 AM
#8
is this not the right filter for the TT 600's?
http://www.knfilters.com/search/prod...x?Prod=33-2217
10-24-2007, 01:51 PM
#9
MBWorld Fanatic!
Join Date: Aug 2003
Location: In my garage
Posts: 8,549
Received 1,067 Likes
on
856 Posts
E55, GLS450, GL63, GLE350
is this not the right filter for the TT 600's?
http://www.knfilters.com/search/prod...x?Prod=33-2217
http://www.knfilters.com/search/prod...x?Prod=33-2217
10-24-2007, 11:40 PM
#11
MBWorld Fanatic!
Join Date: Aug 2003
Location: In my garage
Posts: 8,549
Received 1,067 Likes
on
856 Posts
E55, GLS450, GL63, GLE350
He rigged some K&N's but they were not made for the car. I'm pretty sure he purchased the BMC's to replace the K&N's.
Trust me, K&N does not make filters for the 2003 and later V12 engines.
Trust me, K&N does not make filters for the 2003 and later V12 engines.
10-26-2007, 12:02 PM
#12
Senior Member
Join Date: Nov 2005
Location: Chicago, IL
Posts: 289
Likes: 0
Received 0 Likes
on
0 Posts
2003 CL600
bmc
Yup hes right. I rigged the k&n's to fit the car. I got some BMC's and they work great!
