That stuck in park thing question

So i have loosend my center wood trim and the loosend the center glove box.
The problem i have is that because the stick is stuck in PARK, there is not enough room to remove the wood trim over the stick. There is to much sticking out from the rear of the wood radio console.
I have tried that stupid hammer on the shifter stick thing to free up the stick so i can remove the wood, butthat crap dont work.
I cant find anything about this in my searches, which suprises me.
Tips or coments guys?

For the record it was that peice of **** plastic bit that had broke. Mercedes.....German engineering and all that bolloxs

All repaired now.
https://mbworld.org/forums/cl-class-...val-guide.html
https://mbworld.org/forums/cl-class-...et-sorted.html
https://mbworld.org/forums/cl-class-...rned-good.html
Had i come back and read the above questions. I would have happily done another one of my write ups, however because you were jumping to conclusions **** you. You do it. And FYI i do a siht load of write ups on various other forums helping others.
Last edited by fspider; Jun 7, 2014 at 06:50 AM.
Trending Topics
The Best of Mercedes & AMG
Last edited by biker349; Jun 13, 2014 at 08:37 PM.




Hopefully, fspider will post a write up about this as it is an issue that will effect every CL at some time if its on the road long enough.
Remember, this forum only is beneficial because of its members and their willingness to share and learn.




