Hey all, although we have been working on 63 development for quite some time, we had not formally announced anything. We wanted to take this chance to give a glimpse into what we are doing, and what we will have available for your 63-series AMG.

We have been doing the majority of our development on a CLK63 Black Series. Have a car here and we're designing and building a number of great upgrades for the vehicle specifically as well as many items that will carry over to other 63-series models. Will use this thread to keep everyone posted. Some of the items being worked on as we speak are:

• Stainless long-tube performance headers + hi-flow cats
• Stainless x-pipe resonator replacement
• Compound brake rotors (front/rear) + upgraded pads
• evosport dampened crankshaft and accessory pulley kit
• Custom software
• Aero Package (front carbon lower diffuser, rear carbon DTM-style wing)
• Track Package (billet lower rear adj. control arm, camber plates, track spring setup)

HEADERS
T304 stainless steel, tig-welded, tri-y design, high velocity merge collector, pulse tuned, port matched, sleeved design. The final product will have a lifetime guaranteed high polish coating.

Below are pics of the prototype unit...more to follow...











Here is the header compared to the 63 Black OE log manifold


compared to:


BRAKES
To start, we will offer multi-piece rear rotor (factory is solid) for the front and rear to match the front. Similar to what we offer now for the 55 AMG's (see below). Later we will offer a carbon ceramic rotor replacement option.





PULLEY
We will be offering the same industry leading technology found in our 55k pulley system for the 63-series cars.


(image of a 55k system for reference

SOFTWARE
Starting with the a basic ECU tune to a custom tune for the pulley and/or long tube header and cats. Done in house with Powerchip. Every evosport power package is tuned using our in house dyno and engineering in partnership with Powerchip exclusively.

AERO
We are developing our own splitter and rear trunk and/or wing for the CLK and CLK Black. With enough demand, we will also be offering this for other 63-series models. These will be out of high quality carbon fiber

TRACK SUSPENSION
All suspension pieces are being designed and produced in-house by our engineering team. The combined team has over 80 year racing experience from Indy Car to F1 to World Challenge and ALMS.

You can see more info on our racing team and program HERE and HERE

Thanks!

 

do you need a sponsor car by any chance? I like what youre up to

 

PM sent

 

The CLK BS is leaving and we have 2 more coming in. Anyone who would like to schedule their 63 in for these mods, please let us know as slots are filling up.

thanks
brad

 

Here are some updates as we wrap up the first development cycle.

Here are some X-pipe pics.




We have the option of Metallic Cats and Hi-Flow resonators for anyone if they are requested, FYI.

Here is a teaser vid with the exhaust (This is with the long tube headers, x-pipe, no cats and OE mufflers):


8MB video - FYI.

here is a much smaller version (the sound is the same, but the video quality is poor to keep it small):



thanks
brad

 

We also did a bolt-in Roll Bar for the CLK63 Black. This can also be built for any CL. For the track or for the show circuit, this came out very trick

Below are pics of the car and of the bolt-in rollbar we've designed (available now) specific to this vehicle. Tig-welded 4130 Chromoly, tight fit, bolt-in, very clean install...available painted or powder coated in any color or wrapped in leather or alcantara. Will post more pics soon...






Here are some pics powder coated before being wrapped in factory match leather (this can be powder coated to match your car or to your color choice if you do not want to wrap it):






Here are some pics of the leather wrap option on the roll bar:




We used the steering wheel to match the pattern, texture and stitching.

BTW, the weight of the bar wrapped is only 42lbs, not too bad!

Thanks
Brad

 

Here are pics of the completed roll-bar installed in the car...

 

Some updates.

Exhaust:
- We did add our high performance resonators, the rasp and harshness is gone. it sounds amazing!

Dyno:
- We have finished the first night/round of tuning. Pretty happy with the results so far! +66 RWHP and +47 RWT for the header, exhaust and software (of course done with our tuning partner Powerchip)!


Here is a quick vid on the rollers:


Aero:
We have completed the front and the rear bits (with big thanks to our aero partner Vorsteiner who came through once again by accomplishing the impossible with far less time then reasonable) - we could make this for CL-chassis with enough demand also:




* You can click on the images for more pics *





* You can click on the images for more pics *

The Carbon weave on the front and rear matches OE almost perfect. These are pre-clear coat, which is happening now. It is really hard to see the CF on the rear due to the lighting, but it is full CF.

More to come........

Thanks
Brad

 

And now..... final dyno numbers as delivered:



There is more to be had on the top end, but we ran out of time. The next one we will get some more!!!!!!

Here is the car hitting 200 on the dyno - YOUTUBE LINK 1 and YOUTUBE LINK 2

Thanks for all that followed this build!

 

http://www.dragtimes.com/2008-Merced...res-13194.html


What can you to to reduce these times with and without a warranty void?

 

You can download our Product Guide for the 63 AMG here.

We can also install full long tube headers (shorty headers hardly make any power on this engine) and complete exhaust. We are also developing a stroker kit for the 6,2L motor.

Email me (simon@evosport.com) for more info.