Help needed with soft close doors not working.
#1
Thread Starter
MBWorld Fanatic!
Joined: Mar 2011
Posts: 1,005
Likes: 7
From: Nashville, TN
SLK55 AMG - Renntech Supercharged
Help needed with soft close doors not working.
First off, do all CL's have soft close doors?
I have my door panel off and I'm looking around and I don't see the unit that would be leaking. I saw a photo of it in another thread, but I don't see anything like it under my door panel.
Can't someone help me out?
I have my door panel off and I'm looking around and I don't see the unit that would be leaking. I saw a photo of it in another thread, but I don't see anything like it under my door panel.
Can't someone help me out?
Last edited by Grip Grip; 09-25-2014 at 09:00 PM.
#2
Super Moderator
Joined: Nov 2001
Posts: 6,340
Likes: 20
From: Southern California, USA
2003 CL55 AMG
All W215 CL's have the soft close system.
You need to peel the noise liner off the door to see behind it where the vacuum system is located.
Peel the back edge back by the locking pin/rear speaker. Be careful not to rip the material.
You need to peel the noise liner off the door to see behind it where the vacuum system is located.
Peel the back edge back by the locking pin/rear speaker. Be careful not to rip the material.
#3
Thread Starter
MBWorld Fanatic!
Joined: Mar 2011
Posts: 1,005
Likes: 7
From: Nashville, TN
SLK55 AMG - Renntech Supercharged
Thanks. I've removed the speaker and peeled back the noise liner. Behind the door skin I believe I see the vacuum assembly, but the white plug at the bottom where the yellow air line connects feels intact. Maybe I've got a leak somewhere else.
#4
Super Moderator
Joined: Nov 2001
Posts: 6,340
Likes: 20
From: Southern California, USA
2003 CL55 AMG
It's a hard location to really see. I had to pull all the hardware off the door (Keyless Go Antenna, etc) and remove the window glass to access the lock/vacuum assist in order to replace it.
You should be able to see if the cap as popped or has a broken ring around it. You certainly will be able to hear if it has an air leak as long as the PSE pump circuit is active.
Pull the fuse for the PSE to reset the circuits.
You should be able to see if the cap as popped or has a broken ring around it. You certainly will be able to hear if it has an air leak as long as the PSE pump circuit is active.
Pull the fuse for the PSE to reset the circuits.
Trending Topics
#8
Junior Member
Joined: Jul 2009
Posts: 43
Likes: 0
From: Somerset UK
CL65 AMG W216, Bentley Continetal R Le mans, Bentley Turbo RT, BMW 735 i, CL65 AMG w215
There can also be a problem with the micro switch in the door which fails to "see" the door latch closing if the door is closed normally. Try closing the door very gently so that the soft close has to function. If it doesn't work then have a look at the vacuum pump in the trunk behind the left hand panel.
#9
All is working,incl soft close right door and trunck,but not the soft close on drivers door,no hissing or klick when I close the door to the point where the soft close should work with the windows down,not a sound,what am I missing.
#10
Super Moderator
Joined: Nov 2001
Posts: 6,340
Likes: 20
From: Southern California, USA
2003 CL55 AMG
Did you reset the PSE by pulling the fuse to re-enable all de-activated PSE circuits ?
#13
Super Moderator
Joined: Nov 2001
Posts: 6,340
Likes: 20
From: Southern California, USA
2003 CL55 AMG
That would be my guess. The only other cause would be that particular circuit of the PSE is dieing.
Reset and listen to how long the PSE runs by sticking your head in the trunk (Driver Side). If it runs for a couple mins its a leak. If it runs for a very short period of time, its the circuit.