rubber seals for turbocharger
#1
MBWorld Fanatic!
Thread Starter
rubber seals for turbocharger
i've searched and can't find the thread showing the 2 rubber seals that look like top hats that fit inside the turbo charger and help with the boost. it showed a part # for these and the cost was really inexpensive like a few dollars a seal and there are 2. i hope you can help me out with the part #. if i recall that post was like 4 years old. it said they were not essential, but helped with the turbo lag, or boost. if i remember correctly the other part mentioned were o-rings part # 0289977948. the part # for the rubber top hat seals might be 279 18 100 80, but when i try that number i don't get a hit on any parts site. any help is greatly appreciated.
thanks, harv
p.s. the top hat seals are the same for all turbocharged mercedes.
my car is a 2004 mercedes cl600
thanks, harv
p.s. the top hat seals are the same for all turbocharged mercedes.
my car is a 2004 mercedes cl600
Last edited by biker349; 06-29-2018 at 02:22 PM.
#2
MBWorld Fanatic!
Was going to order new ones next week, figured I might as well replace them when I do my motor mounts. I'll let you know what the number is then if no one finds it before then.
The following users liked this post:
biker349 (06-30-2018)
#3
MBWorld Fanatic!
Trying to find the thread for you but no luck. I'll look the parts kit up in EPC. I think I still have my old ones sitting in my toolbox at work.
A2750960002 is the valve kit. Comes with the rubber, the top and seal, and new bolts. One per turbo.
A2750960002 is the valve kit. Comes with the rubber, the top and seal, and new bolts. One per turbo.
Last edited by ItalianJoe1; 06-30-2018 at 12:21 AM.
The following users liked this post:
biker349 (06-30-2018)
#4
MBWorld Fanatic!
Thread Starter
i would like to get just the top hat rubber seals if possible.