ok... as requested... here are all the combinations
Mesh Grill on AMG front spoiler? opinions?
Thread Starter
MBWorld Fanatic!
Joined: Jul 2002
Posts: 5,660
Likes: 2
From: Charlotte, NC
2000 CLK430
Mesh Grill on AMG front spoiler? opinions?
I am a fan of the AMG bodykit on my car, love the simple yet elegant look it gives my car. However, i am also a fan of the mesh grill on the bottom of bodykits like the Lorinser DTM kit. How do you think my car would look if i removed the horizontal piece between the foglights (the damn one that fell out in the parking lot because Mercedes decided not to install it properly 
) and fabricating a white mesh grill to fit in that space? I would want it installed as far back into the slot as possible so that it would be subtle and not tacky. Havent seen anyone do this yet, wondering what you guys think. Im at college and dont have a way to get a picture on here, but anyone with some free time mind photoshopping a CLK430 (if not white, in a light color) so i can see how it would look? Thanks in advance for any help or opinions.
Eric
) and fabricating a white mesh grill to fit in that space? I would want it installed as far back into the slot as possible so that it would be subtle and not tacky. Havent seen anyone do this yet, wondering what you guys think. Im at college and dont have a way to get a picture on here, but anyone with some free time mind photoshopping a CLK430 (if not white, in a light color) so i can see how it would look? Thanks in advance for any help or opinions.Eric
Thread Starter
MBWorld Fanatic!
Joined: Jul 2002
Posts: 5,660
Likes: 2
From: Charlotte, NC
2000 CLK430
thats why i would like to see pictures, but agreed on that. silver i thought might look too unfinished with the white car, maybe black would be the way to go. but i think you are right in that white would be too much.
Eric
Eric
Super Member
Joined: Nov 2001
Posts: 565
Likes: 0
From: the OC, So Cal
2000 CLK 320
Not too bad
It doesn't look that bad. Try putting it the same silver mesh grill that they use with Lorinser. (I would try but no photosop 
) I was actually also thinking about the same thing. Or maybe putting the mess grill in the back ground while still keeping that silver thing in the middle.
Accord.......bust yo photoshop out......here's a project for ya
) I was actually also thinking about the same thing. Or maybe putting the mess grill in the back ground while still keeping that silver thing in the middle.Accord.......bust yo photoshop out......here's a project for ya
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
Senior Member
Joined: Mar 2002
Posts: 264
Likes: 0
From: CA
CLS 500
I think it looks too tacky. I say stick with the original. Just my opinion. The DTM kit does look good with the mesh grill, but not with the original facial. But good job on the photoshop though!
Jon
Jon
Almost a Member!
Joined: Aug 2002
Posts: 72
Likes: 0
From: Wilmington,N.C.
CLK55AMG
Petie, Where can you buy the mesh. Does it cone in a roll or what? I asked this question a few months ago and someone told me to go to Lowes, and buy some chicken wire. It hurt my feelings so I dropped the subject. Just kidding about hurting my feelings.
I see you are from Charlotte I am from Wilmington nice to meet you!
I see you are from Charlotte I am from Wilmington nice to meet you!
Thread Starter
MBWorld Fanatic!
Joined: Jul 2002
Posts: 5,660
Likes: 2
From: Charlotte, NC
2000 CLK430
nice to meet you GBD, im currently in school in the sticks of Tennessee, but yeah i like right outside Charlotte. I hadnt really considered where i was going to purchase the mesh, i know they sell it precut and in rolls for rice rockets, that is always a possibility, but i dont think that chicken wire is an entirely bad idea, although it does seem a bit intimidating. I wouldnt want to have chicken wire on my car, but it would work well i think. mmgrad, you were a lot of help, thank you. i think the black would be a bit darker when actually put on the car as it would be back in the shadows, as would the silver, i think the silver with no center piece looks pretty good. as long as i am careful, i think i could make it look very nice. we'll see i guess, still want to decide if it is something i should do as the car looks great as is.
Eric
Eric
Super Member
Joined: Dec 2001
Posts: 628
Likes: 6
2018 E400 COUPE SOLD -> Porsche Taycan 4S
Originally posted by mmgrad
AND HERE IS MY ATTEMPT OF PHOTOSHOPPING A BLACK MESH GRILL ON A STOCK 430 GRILL:
AND HERE IS MY ATTEMPT OF PHOTOSHOPPING A BLACK MESH GRILL ON A STOCK 430 GRILL:
NICE!!! can i have one!??
Last edited by byip25; Sep 11, 2002 at 04:07 AM.
Thread Starter
MBWorld Fanatic!
Joined: Jul 2002
Posts: 5,660
Likes: 2
From: Charlotte, NC
2000 CLK430
funky102,
yeah, i saw that on there, it looked to me that the mesh was large in respect to the size of the wire and the size of the mesh, i could be wrong though, just judging by the picture. does it look that way to you, but for 5 bucks, if it doesnt work, i can pick up change of the ground for a day or two and get my money back.
Eric
yeah, i saw that on there, it looked to me that the mesh was large in respect to the size of the wire and the size of the mesh, i could be wrong though, just judging by the picture. does it look that way to you, but for 5 bucks, if it doesnt work, i can pick up change of the ground for a day or two and get my money back.
Eric
Thread Starter
MBWorld Fanatic!
Joined: Jul 2002
Posts: 5,660
Likes: 2
From: Charlotte, NC
2000 CLK430
just looked on ebay again, there is more mesh with a different picture that was put up today, looks like what i want, and its only $2.99. hell, i think i have enough change in my pocket, i think im just gonna buy it and see what i can do. when i put it on, ill take a picture (which will probably be thanksgiving when i get back home) and see what you guys think.
Eric
Eric
MBWorld Fanatic!
Joined: Jul 2002
Posts: 5,289
Likes: 9
From: So Cal
W213 '17 E43 ///AMG - W211, W208 no more
#3
I would have preferred if MB redesigned the CLk to this version.... which MB guru can pinpoint which car i 'borrowed' these parts from? Pretty obvious....hehehe
Lets see if someone can custom mold this body....
Lets see if someone can custom mold this body....
