wheels: will these fit?
Do you guys have any advice buying wheels of ebay?
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT
Last edited by xmatty89; Jun 29, 2011 at 04:08 PM.
My advice for buying through eBay is don't buy directly through eBay. Call up the dealer yourself to see if you can negotiate pricing or a tire package. Mention what forum you're off of and they might be more compelled to give you a slight discount. Use a credit card as payment so you can dispute the charge if they're monkeying around with shipping or give you subpar products.
My advice for buying through eBay is don't buy directly through eBay. Call up the dealer yourself to see if you can negotiate pricing or a tire package. Mention what forum you're off of and they might be more compelled to give you a slight discount. Use a credit card as payment so you can dispute the charge if they're monkeying around with shipping or give you subpar products.
You sure +ET30 will fit on the front? When I had 18's with +ET35 it stuck outside the fender on the front by about 1-2mm so I could only imagine that a +ET30 would sit far outside the fender. I read safe for our cars was front +ET35-40 and rear +ET32-38
I'm running +32 on my fronts with a few more mm to spare and 2mm is less than a tenth of an inch difference outboard.
With that said, I'd want to see what someone with an offset of 30-35 and an 8.5 front looks like for comparison.
My advice for buying through eBay is don't buy directly through eBay. Call up the dealer yourself to see if you can negotiate pricing or a tire package. Mention what forum you're off of and they might be more compelled to give you a slight discount. Use a credit card as payment so you can dispute the charge if they're monkeying around with shipping or give you subpar products.
I would like it to be aggressive but not look weird or anything.
does anyone have a picture of +et30-32 on the front?
Last edited by xmatty89; Jun 29, 2011 at 10:59 PM.
Last edited by dlbehrns; Jun 29, 2011 at 11:38 PM.
Trending Topics
The Best of Mercedes & AMG
I'm running +32 on my fronts with a few more mm to spare and 2mm is less than a tenth of an inch difference outboard.
With that said, I'd want to see what someone with an offset of 30-35 and an 8.5 front looks like for comparison.
I'm running +ET38 8.5j on the front with only a few mm to spare. Maybe it depends on the rim manufacture
I would have to say I'll be pushing it with my setup if I ran a +ET35, honestly doubt I could do so.
Kind of like the same principal of going up a a rim size means you have to go down a tire thickness especially if you're going to drop it like its hot.
Last edited by Williams707; Jun 30, 2011 at 01:15 AM.
http://www.tirerack.com/wheels/WheelCloseUpServlet?target=runWheelSearch&initialP artNumber=50851935214422B&wheelMake=BE+by+Breyton& wheelModel=GTS-AV&wheelFinish=Black+Painted&showRear=yes&selected Rear=50951935214422B&autoMake=Mercedes-Benz&autoModel=CLK55&autoYear=2001&autoModClar=&fi lterFinish=All&filterSize=19&filterBrand=BE+by+Bre yton&filterSpecial=false&filterNew=All&filterWeigh t=All&sort=Price
Last edited by xmatty89; Jun 30, 2011 at 04:57 PM.
http://cgi.ebay.com/ebaymotors/19-ME...#ht_7251wt_944
link:
Pretty much the same thing, no? CC companies are pretty aggressive with protecting the customer if they have a valid reason to dispute. At any rate, I was just saying to buy direct through the vendor to have the ability to negotiate pricing. If you're fine with the price, then by all means, buy via eBay.
I'm running +ET38 8.5j on the front with only a few mm to spare. Maybe it depends on the rim manufacture
I would have to say I'll be pushing it with my setup if I ran a +ET35, honestly doubt I could do so.DL, do you think you were safe to run an offset of +ET32 because your rim was only a 8j width rim? The rims they are talking about here are 8.5j widths. It was to my understanding that an 8j rim is 5mm shorter so you could increase the offset/ET number.
Kind of like the same principal of going up a a rim size means you have to go down a tire thickness especially if you're going to drop it like its hot. 
http://www.tirerack.com/wheels/WheelCloseUpServlet?target=runWheelSearch&initialP artNumber=50851935214422B&wheelMake=BE+by+Breyton& wheelModel=GTS-AV&wheelFinish=Black+Painted&showRear=yes&selected Rear=50951935214422B&autoMake=Mercedes-Benz&autoModel=CLK55&autoYear=2001&autoModClar=&fi lterFinish=All&filterSize=19&filterBrand=All&filte rSpecial=false&filterNew=All&filterWeight=All&sort =Price
Hell, I have 9.5 and I only have a V6...but along with better traction (which is kind of a moot point for the 320s), it looks so much more aggressive from the back. Obviously, the only downside of not going with a square setup is that you can't rotate from front to back and vice versa.
Last edited by xmatty89; Jun 30, 2011 at 04:59 PM.
As you know I have ET32 on my rears with a 5mm spacer so my rears are actually ET27 which sits pretty much flush with the rims.
cuz seller has to pay fees (ebay-pay-pal) after ea auctions. so in this case at the very least will cost seller on $860.00 item about $50.00+. so same item w/o ebay u should be able to buy it for $800.00 or less.
My point is if you buy items on eBay you can always get your money back if items is not as describe or something wrong etc. !! Try getting your money back when you buys from somewhere else other than eBay ! Even if some online company other than eBay grants your returned you are stuck with shipping cost , the shipping cost could range from $180.00 to $250 for 4 wheels ??? plus you won't get discount on shipping cause we don't have dealer license. And remember that is if they grant you returnes and its probably going to be store credit not 100 % money back like on ebay plus original shipping cost !!! You do the math !
As you know I have ET32 on my rears with a 5mm spacer so my rears are actually ET27 which sits pretty much flush with the rims.







