Please Tell Me What This Is.. See Pic
#1
Member
Thread Starter
Join Date: Mar 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
05' E500 Sport, 01' CLK 320
Please Tell Me What This Is (NEW PIC!)
I can't figure out what to do with this tool. It came with the grille next to the glue.
Last edited by cmykdesign; 05-26-2004 at 03:19 AM.
#3
MBWorld Fanatic!
Join Date: Nov 2001
Location: Georgia
Posts: 2,618
Likes: 0
Received 50 Likes
on
40 Posts
E 63S Wagon Renntech, E55 Renntech, SL65, SL 55 030, ML, bunch of old ones--they come, they go...
OK, I win....
it's for the glue/adhesive. You're supposed to put the tube into this tool and gently twist it so it flows evenly and without big globs coming out. No, it's not broken. Europeans think in advance, before it's too late to rip the part off again, sand/scrape off the excess adhesive, and try to re-apply (which it won't).
Sorry, I just sold a bunch of body kits in the old days....
Sorry, I just sold a bunch of body kits in the old days....
#6
Member
Thread Starter
Join Date: Mar 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
05' E500 Sport, 01' CLK 320
its the schatz grille with emblem in the middle. The emblem is not attached you have to glue it on... I cant figure out why the buyer has to attach it.
#7
Member
Thread Starter
Join Date: Mar 2004
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
05' E500 Sport, 01' CLK 320
New Image
You're supposed to put the tube into this tool
Ok I never claimed to be a rocket scientist... but looking at this new pic how is that big tube suppose to fit inside that small tool?
Trending Topics
#8
Member
Join Date: Jun 2002
Location: Virginia Beach, VA
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
2001 CLK 320
You slide the narrow tapered end of the tube of glue into the holder like you're using a carabiner. Insert the flat corner of the tube under the mid open area. Slide the tube towards the t-handle until it's fully in and then slide it back away from the t handle, seating it underneath the forward part.
If done correctly the handle is now perpendicular to the tube. By twisting the handle you "roll up" the tube from the narrow end, forcing the glue to come out at an even controlled pace.
Regards,
-Bouncer-
If done correctly the handle is now perpendicular to the tube. By twisting the handle you "roll up" the tube from the narrow end, forcing the glue to come out at an even controlled pace.
Regards,
-Bouncer-