2000 clk320 limp mode UGHHHHHH



Now my problem is no message on the dash . When I drive it I cannot put it in park unless I shut it off . I did notice that he D P R N light or indicator is black no letter.
The last thing I can say is there was a yellow triangle the error light,
So where do I start ? shift plate? shift plate solenoid ? 1 2 3 or 4 ? How do I diagnose this ? aka and have worked on cars I know my why around. I shift plate is na easy job for me , I just don't want to do it for nothing and find out it was something else or a solenoid and not the plate I have head of the happening. Hope some one can help me …….….
You may also want to visually inspect the TCU. If it's oil soaked, the 50 cent o-ring has failed and oil has wicked from the transmission and contaminated it.






Last edited by karayjay; Dec 13, 2018 at 05:49 PM.



If it is the shiftier module after I replace does it need to be program I would thing NO ..........
Last edited by karayjay; Dec 16, 2018 at 03:00 PM.




Deep diagnostic trouble codes (DTC) are not available on the W208 via the OBDII port.
The scanner will need to access the 38 pin diagnostic port and proprietary set of commands.
Trending Topics



The Best of Mercedes & AMG





