Please check my VIN for Balance shaft issue?
Can someone check this VIN# WDDHF5EB0DA730456
I've checked and shows 272952 32 078734, and it should be below 30 468993
if I consider the 32 then NOT in the range, without considering 32 then IN range.
Any clarification? Thanks in Advance
This is the website I used =>
http://www.vindecoderz.com/EN/Mercedes-Benz
Last edited by hamooda_47; Jul 23, 2015 at 12:26 AM.
VIN : WDBRF52H07F909500
Engine part # : 272920 30 561707
I am thinking that "561707" is out of the range but can someone confirm?
Regards,
Pete
Thank you! Dont want to purchase a problem with 80k miles for $9k
I have a 2006 E350 with VIN WDBUF87J16X200235
is it within the affected range? I am getting a P0016 code intermittently, on or off for hours on either state. Usually off when car starts at least until engine fully hot. Observing the cams at 305 degrees of crank I see left cams centered, right intake centered, right exhaust off a bit. Any info or ideas appreciated
thank you
The Best of Mercedes & AMG
Thank you! Dont want to purchase a problem with 80k miles for $9k
I have a 2006 E350 with VIN WDBUF87J16X200235
is it within the affected range? I am getting a P0016 code intermittently, on or off for hours on either state. Usually off when car starts at least until engine fully hot. Observing the cams at 305 degrees of crank I see left cams centered, right intake centered, right exhaust off a bit. Any info or ideas appreciated
thank you
I am looking at a 2007 C280 with 60k miles. The vin is WDBRF92HX7F912573.
Can you tell me if this engine is in the affected range?
Thanks
Andy
I am looking at a 2007 C280 with 60k miles. The vin is WDBRF92HX7F912573.
Can you tell me if this engine is in the affected range?
Thanks
Andy
Go here: https://eclaim.kccllc.net/caclaimforms/mse/home.aspx
then click on Claim Form Generation.
I wonder if a new thread has been made about this, or if a new thread should be placed in the car sections where this engine could be an issue?
Last edited by algemene; Aug 17, 2015 at 12:48 PM.
Thank you.
Thank you.
That one has M272 engine #402887, which is in the range for potential balance shaft failure.
thanks a million
thanks a million
Thanks!!



