My New Mods
#1
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 1,170
Likes: 0
Received 1 Like
on
1 Post
03 CLK500, 04 X3, No 07 GT3RS :(
My New Mods
Custom Titanium Gray Silver CF Interior Trim from Harris!!!
A higher res pic: http://friscoreef.home.comcast.net/images/clk/CF_4.jpg
Evosport Underdrive Pulley
A higher res pic: http://friscoreef.home.comcast.net/images/clk/CF_4.jpg
Evosport Underdrive Pulley
#2
MBWorld Fanatic!
Join Date: Aug 2002
Location: NYC/NJ.
Posts: 3,381
Likes: 0
Received 0 Likes
on
0 Posts
W209 - W163
How do the pullies feel? I used to have them on my CLK430 and now considering them for the CLK500. Sweet interior products!! Post pics when everything is installed! They rock!!!!
#3
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 1,170
Likes: 0
Received 1 Like
on
1 Post
03 CLK500, 04 X3, No 07 GT3RS :(
The interior is about as dirty as I've ever had it - I'll take some better pics after I clean up. Install took much longer than I expected - what a pita!
Another larger version of one of the above: http://friscoreef.home.comcast.net/images/clk/CF_5.jpg
Another larger version of one of the above: http://friscoreef.home.comcast.net/images/clk/CF_5.jpg
#7
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 1,170
Likes: 0
Received 1 Like
on
1 Post
03 CLK500, 04 X3, No 07 GT3RS :(
It took several months - I lost track a while ago honestly. I say go for it!!!
I basically pulled out everything that I could get out by myself (13 pieces done so far) - I also have a Kleemann steering wheel being redone to match but it's still being fabricated. I'd like to do a couple more pieces honestly (2 rear headrest backs, 8 headrest rail trim pieces, 2 front seat pull handles and surround trim, 2 entry sills) but will have to wait and see if Harris ever returns from Europe!!! It would also look pretty slick to have the leather restitched in yellow to match a set of yellow BBK calipers - I guess that has to wait until I get done with the engine mods.
I basically pulled out everything that I could get out by myself (13 pieces done so far) - I also have a Kleemann steering wheel being redone to match but it's still being fabricated. I'd like to do a couple more pieces honestly (2 rear headrest backs, 8 headrest rail trim pieces, 2 front seat pull handles and surround trim, 2 entry sills) but will have to wait and see if Harris ever returns from Europe!!! It would also look pretty slick to have the leather restitched in yellow to match a set of yellow BBK calipers - I guess that has to wait until I get done with the engine mods.
Trending Topics
#11
MBWorld Fanatic!
Join Date: May 2002
Location: Hong Kong / Jakarta
Posts: 3,216
Likes: 0
Received 0 Likes
on
0 Posts
CLS350
Frisco,
It wouild look really cool if you got your shifter cover replaced in alcantara like the new brabus shift knob/cover for the CLS. that would look nice.
It wouild look really cool if you got your shifter cover replaced in alcantara like the new brabus shift knob/cover for the CLS. that would look nice.
#13
MBWorld Fanatic!
Join Date: Jan 2004
Location: Boston
Posts: 2,853
Likes: 0
Received 1 Like
on
1 Post
CLK500/Range Rover HSE/E55 AMG/Bmw 328Xi coupe/BMW 4.8x/Bmw 335i/GS350/Audi S5/E350
frisco, the interior looks sick man.....let me know on how that pully works for you as i want to do that upgrade. Ohh yeah how about those brabus springz...hook a fellow MBworld parton up man!
#14
Member
Join Date: Jun 2004
Location: Ladera Ranch (i.e CaucAsia)
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
2005 SL600 Designo, Graphite Gray, Panorama Roof
How much to do that?
And do I need to send him my parts or can I exchange?
How long turn around?
How do I contact this guy?
And do I need to send him my parts or can I exchange?
How long turn around?
How do I contact this guy?
#16
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 1,170
Likes: 0
Received 1 Like
on
1 Post
03 CLK500, 04 X3, No 07 GT3RS :(
It was all done custom using my existing pieces and the lead time was about 8 weeks. Harris = Harton Motorwerks, one of the site sponsors. IIRC, the standard CF trim set to replace the wood trim was somewhere between 1-2k, but I got more stuff done and it cost a bit more.
I tried to get a better pic of the seat back, but it came out a bit underexposed. It's amazing how much my camera color balances when in auto mode - the pics I took all make the CF color look different. I'll try to get a couple better pics on the weekend.
I tried to get a better pic of the seat back, but it came out a bit underexposed. It's amazing how much my camera color balances when in auto mode - the pics I took all make the CF color look different. I'll try to get a couple better pics on the weekend.
#17
Member
Join Date: May 2003
Location: Chicago, IL
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
CLK500
Frisco......NICE WORK MAN!!!!
Pretty sharp interior. Perhaps a CF lip for the front AMG bumper to tie the interior & exterior together. Do you have a pic of the new steering wheel. I too am going to get the Underdrive Pulleys.
You are a CF GOD!!
Pretty sharp interior. Perhaps a CF lip for the front AMG bumper to tie the interior & exterior together. Do you have a pic of the new steering wheel. I too am going to get the Underdrive Pulleys.
You are a CF GOD!!
#18
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 1,170
Likes: 0
Received 1 Like
on
1 Post
03 CLK500, 04 X3, No 07 GT3RS :(
I love the avatar pic Jay - it's really a nice shot of your car. Sorry I don't know how to use PS better, because I sort of massacred it and really don't like the way the edges of the car also came out blurred. I'll try to see if I can do better sometime over the weekend.
I actually don't have a pic of the steering wheel - it's still out being redone in CF to match. It's one of those Kleemann (Victor?) ergo/sport wheels that has perforated leather ergonomic shaped hand grips with decorative inserts.
Speaking of bumpers...
I actually don't have a pic of the steering wheel - it's still out being redone in CF to match. It's one of those Kleemann (Victor?) ergo/sport wheels that has perforated leather ergonomic shaped hand grips with decorative inserts.
Speaking of bumpers...
#20
Senior Member
Join Date: Mar 2004
Location: Sunny California
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
hehe looks like my interior except mine is in black. I still need to do the headrest backs, but for me it's 5 pieces total for the front n back. Thing is with the rear headrests, there are button mechanisms which, after the CF process might be obstructed and not work at all...but im trying anyways. wish me luck!
We seriously need to do a photoshoot together some day. =)
We seriously need to do a photoshoot together some day. =)
Last edited by BrabusW203; 10-09-2004 at 10:00 PM.
#22
MBWorld Fanatic!
Thread Starter
Join Date: Jul 2002
Location: Bay Area, CA
Posts: 1,170
Likes: 0
Received 1 Like
on
1 Post
03 CLK500, 04 X3, No 07 GT3RS :(
ok, well I tried to get new pictures of the CF - still not perfect but it gets the point across. I think I know what I want to do next inside too - there's always something!
I also finally got a sound clip of my exhaust (Eisenmann Race 2x83mm Round): startup + a couple quick revs
http://friscoreef.home.comcast.net/eisenmann.mp3
I also finally got a sound clip of my exhaust (Eisenmann Race 2x83mm Round): startup + a couple quick revs
http://friscoreef.home.comcast.net/eisenmann.mp3
Last edited by Frisco; 10-10-2004 at 06:35 PM.
#24
I'm not a fan of carbon fiber– I've seen so much of the cheap-looking stuff that it's kind of spoiled for me– but this is quite nice. And from the look of that close up of the stereo, you have obviously taken great care to do it right–*the fit looks like it was done at the factory. Great job.
And that exhaust sounds great, too.
And that exhaust sounds great, too.