Megacrazy's Build Thread




A weekend project on my to do list as well, if I can get a weekend off.
Love the woodwork delete, A lot of creativity goes a long way in saving bucks too.
Cheers, Gator
I'm working on a sort of head up display now...something that would be able to project on the windshield from Android (torque) and the head unit as well. We'll see how it works out
The Best of Mercedes & AMG
I'm in central Jersey. The work was done at http://www.maximumpsi.com/. Little more pricey compared to your average exhaust shop but they were total pros and the work is flawless. They mostly work on BMWs but they liked the AMG as well haha.
http://www.ebay.com/itm/Mercedes-Benz-CLK-Class-AMG-MATTE-PAINT-SUPERCHARGED-2004-mercedes-clk-55-amg-kleeman-supercharger-/111493760208?forcerrptr=true&hash=item19f58bc4d0&item=111493760208&pt=US_Cars_Trucks
Wrong thread.
Cadillac night vision camera (aka FLIR) install.
It's hard to get one of these cameras in good condition for a reasonable price but I finally managed to get my hands on one. The idea is to wire the camera to the head unit EXT switch and have it display on an additional display and/or the head unit as well. So, press ext on the head unit, camera powers on, display in front of driver flips up...and we have FLIR.
I have all the parts and started by mounting the camera. It fits where distronic would sit, with a few cuts here and there
So, step 1 - obtain the camera (which is gigantic):
Step 2 - understand where the camera will go, make some cuts and drill the mounting holes. Paint over all cuts so no rust:
Step 3 - modify front grille...like so:
Step 4 - make a wiring harness that will last (heat shrink wrap, braided shielding etc):
Step 5 - test your harness and make sure it works

Step 6 - mount camera:
More coming as the install continues
Last edited by megacrazy; Jul 25, 2017 at 02:25 PM.
If you plan to run the signal to more than 1 screen install a video signal amplifier pictured here:
Step 9 - Install your monitor of choice.
Step 10 - Press EXT on your Kenwood and watch the screen flip up.
Watch on head unit as well if so inclined
Step 11 - Results
Last edited by megacrazy; Jul 25, 2017 at 02:30 PM.
Regarding the AMG bumper, I have the stock CLK bumper but I want to change the entire kit to AMG. This might sound stupid but do I need anything else other then the bumper to fit it on my car?
I mean is there some "AMG kit" or something that I will need to use or I'll just be able to fit the AMG bumber without any extra parts and ...
Also I wanted to ask, what is the radiator issue?
BTW your car looks hella good
Regarding the AMG bumper, I have the stock CLK bumper but I want to change the entire kit to AMG. This might sound stupid but do I need anything else other then the bumper to fit it on my car?
I mean is there some "AMG kit" or something that I will need to use or I'll just be able to fit the AMG bumber without any extra parts and ...
Also I wanted to ask, what is the radiator issue?
BTW your car looks hella good

It depends what car you have. Generally going from non AMG to AMG you have to change everything that's attached to the bumper. Think impact absorbers, brackets, chrome strips etc etc. It's a pricey project. I have a list of part numbers for the project if you need it.
Search the forums for the Valeo issue. Long story short the transmission cooler in the radiator fails, mixing coolant with the transmission fluid which in turns messes up the transmission.
The new middle piece bridges the gap between the spare tire well and the bumper/CF diffuser nicely...and is functional. I may add more pieces in the future to cover the bottom of the exhaust.
The steering wheel is not done yet...but it's almost there

Regular shot

Closer

And one to make it more visible

Last edited by thaile88; Apr 12, 2015 at 02:25 PM.
Some updates. Installed the Renntech airbox...next up are gloss black valve covers to match the rest of the engine bay. They're leaking so I might as well get them done.
Last edited by megacrazy; Jul 25, 2017 at 02:21 PM.












