Home link for garage
I have a rolling code system, so after I program the cars from the garage remote, I then have to push button on garage motor and push homelink button a time or two, for it to finish programming. I had no problems w/ the GL450, previous '10 E550 and '08 CLK550.
I clear the buttons by obtaining the green light. Next step is the issue, because instead of the home link button and garage controller button, I am holding down turning into a "fast yellow" to accept the code, it goes green and I am dead in the water. Any tips??!!!
http://www.mbusa.com/mercedes/owners...lass/model-All
If unsuccessful check "Problems when programming" in manual or dealer may need to check software or replace unit under warranty.
http://www.mbusa.com/mercedes/owners...lass/model-All
If unsuccessful check "Problems when programming" in manual or dealer may need to check software or replace unit under warranty.
Additional info: CLICK HERE
http://www.mbusa.com/mercedes/owners...lass/model-All
If unsuccessful check "Problems when programming" in manual or dealer may need to check software or replace unit under warranty.
How to program Mercedes Homelink for rolling code garage door openers - YouTube
I made the video with the C63 BS, but the programming is identical to my CLS550 steps.
Thanks
Trending Topics
Additional info: CLICK HERE
The Best of Mercedes & AMG
MY12 CLS up to August 31, 2011 production
http://www.mbusa.com/mercedes/owners...lass/model-All
3 videos under Light & Mirrors category
How to program Mercedes Homelink for rolling code garage door openers - YouTube
I made the video with the C63 BS, but the programming is identical to my CLS550 steps.






