do our cls550 have a deep front hub? trying to get the proper spacers
If your wheels have less than this, then you will need a spacer, equal to the difference.
i.e. 34.5mm required, wheel has 25mm offset needs a 9.5mm spacer.
If your wheels have a greater than 34.5mm offset, they will sit deeper in the wheel well and tires may rub against the inner fender liner.
If your wheels have less than this, then you will need a spacer, equal to the difference.
i.e. 34.5mm required, wheel has 25mm offset needs a 9.5mm spacer.
If your wheels have a greater than 34.5mm offset, they will sit deeper in the wheel well and tires may rub against the inner fender liner.
Trending Topics
our front hubs are deeper, this means you cannot have the flange that you get for the rear.
so the front needs to be hubcentric without the flange, and the rear needs to be hubcentric with the flange.
I'm noticing even though this vehicle started in 2012, there are still a lot of unknowns about this car. Probably because it is not old enough or not long enough for it to be out of warranty for the discoveries to happen
The Best of Mercedes & AMG







