AMG GT BS wing on GTR?
#1
AMG GT BS wing on GTR?
Has anyone been able to put a BS wing on an AMG GTR?
The following users liked this post:
Go Dawgs (08-09-2022)
#2
#3
Will it work without the electronics?
Can you retrofit the in-trunk supports?
Can you retrofit the in-trunk supports?
#4
Where there is a will and enough money, there is always a way.
#5
Senior Member
It wouldnt look right.. GTR doesnt have the same body shape as the BS.. BS has more vents and aero’s on the body so a huge spoiler in the back looks nice on it
Trending Topics
#8
Senior Member
![](https://cimg7.ibsrv.net/gimg/www.mbworld.org-vbulletin/2000x1802/img_7202_5f62cdc55cb087fc542637dddbcee5b6d0590a67.jpg)
This is what Ive done to my rear wing. I know it doesnt compare to the BS wing, but I think our (GTR) wings are to shy. Can be a little more agresive, like a GT3RS style. For me the BS wing is too much,
The following 7 users liked this post by Road Racer:
57 GTR (08-08-2022),
AMGstar305 (02-13-2023),
lgarcia (02-10-2023),
reignz (08-08-2022),
Skilly (08-08-2022),
and 2 others liked this post.
#10
Senior Member
it will not fit.
trunk and shape of the trunk is different
trunk and shape of the trunk is different
#11
Senior Member
#13
Senior Member
I think I saw a Tiki post about a double wing in development, not 1:1 like the BS but one that would incorporate a smaller wing in the middle of the wing risers. May have been a different company, but I feel strongly that it was some IG post by Tikt
#15
MBWorld God!
![](https://staticssl.ibsrv.net/autocomm/EvoM/fcotmicon.gif)
Join Date: Jul 2010
Location: on my way
Posts: 30,672
Received 3,405 Likes
on
2,848 Posts
2012 CLS63
Yeah, it's not to krauty either
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
#16
Senior Member
#18
Senior Member
No, but I could make more.
You just have to figure it out the hardware to use.
I had to paint some SS nuts, and some aluminum washers to place longer bolts.
Could send you detailed pixs where it showed what bolts, nuts and washers I used.
You just have to figure it out the hardware to use.
I had to paint some SS nuts, and some aluminum washers to place longer bolts.
Could send you detailed pixs where it showed what bolts, nuts and washers I used.
#21
Senior Member
![](https://cimg9.ibsrv.net/gimg/www.mbworld.org-vbulletin/1244x1228/gtr_black_serie_wing_927a16d28637e6b567fa67b0fb11af504101649e.png)