Possible Modifications to 1991 300ce?
#201
MBWorld Fanatic!
Thread Starter
Quoted from 2phast:
Yes, shame on me but they are cool mods
Sean elected to get the OE MB mirror (last one built) and I have since switched over to using this one only. It more closely resembles the OE W124 mirror (stalk mounts from the rear), plus it has a internal compass and less problems with the Homelink.
It is more complicated to build but the end result is worth it.
Attached Thumbnails
Yes, shame on me but they are cool mods
Sean elected to get the OE MB mirror (last one built) and I have since switched over to using this one only. It more closely resembles the OE W124 mirror (stalk mounts from the rear), plus it has a internal compass and less problems with the Homelink.
It is more complicated to build but the end result is worth it.
Attached Thumbnails
Last edited by Saijin_Naib; 06-10-2009 at 09:13 PM.
#202
MBWorld Fanatic!
Thread Starter
Does anyone know if I can use the Euro lenses on my American DOT headlight housings? It'd save me a bunch of money to just get the nicer leneses without having to get the whole housing assembly and new wiper motors and bulbs and the 4-6pin connectors and such.
#203
Super Member
Join Date: May 2003
Location: Boise, ID, USA
Posts: 890
Likes: 0
Received 4 Likes
on
4 Posts
300D, 500E, E420
The good news is, you can get aftermarket Euro lights (TYC or Depo) for about $200/pair, which is less than half what you'd likely pay for Bosch or Hella. The kwality isn't as good of course, but unless you're super picky, they're not bad for $200. Detailed photos of the Depo lights are on my website at this link. If you get any Euro lights, make sure you install Lamin-X protective film... the glass lenses have a nasty habit of getting cracked, holed, or broken.
#204
MBWorld Fanatic!
Thread Starter
Ahh okay. I ask because I'm torn between these aftermarket ones with NO fluting what-so-ever on the glass lense (http://cgi.ebay.com/ws/eBayISAPI.dll...m=110400019704) and these Eagle Eyes replicas for dirt cheap (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT).
The second link, the seller will give me 10% off the order and combine ship so I was looking to get those replicas + (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT) and (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT).
Another question: Are the housings of poor quality or is the glass of poor quality on the replicas? Am I better off getting either the real Euro housings and replacing the lenses with the clear replica lens (for a future E55 bi-xenon retro) or would the 94/95 DOT housings be a similar quality housing to put the new lense on?
What exactly is wrong with the TYC/DEPO lights compared to the OEM Bosch/Hella lights? Do they not fit right, do they fall out? I don't want another clear-corner fiasco (crappy clips, the damned things fell out on the road).
The second link, the seller will give me 10% off the order and combine ship so I was looking to get those replicas + (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT) and (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT).
Another question: Are the housings of poor quality or is the glass of poor quality on the replicas? Am I better off getting either the real Euro housings and replacing the lenses with the clear replica lens (for a future E55 bi-xenon retro) or would the 94/95 DOT housings be a similar quality housing to put the new lense on?
What exactly is wrong with the TYC/DEPO lights compared to the OEM Bosch/Hella lights? Do they not fit right, do they fall out? I don't want another clear-corner fiasco (crappy clips, the damned things fell out on the road).
#206
Super Member
Join Date: May 2003
Location: Boise, ID, USA
Posts: 890
Likes: 0
Received 4 Likes
on
4 Posts
300D, 500E, E420
Another question: Are the housings of poor quality or is the glass of poor quality on the replicas? Am I better off getting either the real Euro housings and replacing the lenses with the clear replica lens (for a future E55 bi-xenon retro) or would the 94/95 DOT housings be a similar quality housing to put the new lense on?
Of course, there is always this test report of TYC & Depo that indicates they may not perform as well as the genuine article. If you do any HID conversion, you'll need to retrofit an entire projector into a W124 lamp assembly, and get a clear glass lens - tons of work, questionable benefit. Just don't ever stick an HID burner into a Euro light assembly with halogen reflector & lens. Click here to read the technical reasons why this is a bad idea.
Ideally, the best factory lighting option is to get 500E Euro lights, which have auxiliary high beams instead of fogs, and also have the back side of the lens housing chromed. Add relays, large wire, a 150A alternator, and overwatt bulbs and you end up with almost the same lumens as HID but without all the hassle. Of course the down side is you lose your fogs, and the total cost is about $1k, but the light output is staggering. I have this exact setup on two of my cars. I would put it on the others if I could afford to.
#207
MBWorld Fanatic!
Thread Starter
Would this set be the DEPO euros like you have purchased then? (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT)
What exactly makes the back gasket not fit well? Is there an issue with the gasket itself that can be fixed or is the rear cover just mis-shapen? Also, have you bent the back cover clips to ensure proper/tight fitment?
I do plan on (eventually) doing a proper HID retro using parts listed here: (e55 bi-xenon projectors, Hella Gen 3-R ballast, ZKW replica lenses, Optic shrouds, Phillips 81522+ D2s bulb)
http://store.theretrofitsource.com/index.php
Do you think those Depos will be a good purchase, or should I spend the (insane) 700$ for the 94/95 OEM lights? Ugh... Hate this confusing mess of crap. I'm tempted by the completely clear lights as they come with the perfect lenses for an eventual HID retro and should offer some nice output versus my cracked, dirty, pitted crap OEM DOT lights :|
What exactly makes the back gasket not fit well? Is there an issue with the gasket itself that can be fixed or is the rear cover just mis-shapen? Also, have you bent the back cover clips to ensure proper/tight fitment?
I do plan on (eventually) doing a proper HID retro using parts listed here: (e55 bi-xenon projectors, Hella Gen 3-R ballast, ZKW replica lenses, Optic shrouds, Phillips 81522+ D2s bulb)
http://store.theretrofitsource.com/index.php
Do you think those Depos will be a good purchase, or should I spend the (insane) 700$ for the 94/95 OEM lights? Ugh... Hate this confusing mess of crap. I'm tempted by the completely clear lights as they come with the perfect lenses for an eventual HID retro and should offer some nice output versus my cracked, dirty, pitted crap OEM DOT lights :|
#208
Super Member
Join Date: May 2003
Location: Boise, ID, USA
Posts: 890
Likes: 0
Received 4 Likes
on
4 Posts
300D, 500E, E420
Would this set be the DEPO euros like you have purchased then? (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT)
Do you think those Depos will be a good purchase, or should I spend the (insane) 700$ for the 94/95 OEM lights? Ugh... Hate this confusing mess of crap. I'm tempted by the completely clear lights as they come with the perfect lenses for an eventual HID retro and should offer some nice output versus my cracked, dirty, pitted crap OEM DOT lights :|
I still don't recommend any HID conversion, it's an awful lot of work for questionable results in the end. Even Rik Johnson (2phast) recently removed his custom HID lights, sold them, and installed plain old Depo Euros on his W124. But, I'll not beat that horse to death...
#209
MBWorld Fanatic!
Thread Starter
Mm, more to mull over. I think I'll get the DEPO set for 200$ or so with the corners and then pop in some MTEC bulbs. Do the Euro housings have the amber bulb shroud like the DOT ones do for the fog, or do I need to actually find a proper amber fog bulb now?
I know the HID conversion is a ***** but it is calling me. Not now, I'm not making nearly enough :P
I don't really plan on using the 94-95 hood ever; I like the pre-facelift + eyebrow spoiler look better.
Am I correct in assuming that tail-lights are tail-lights? I mean, if I were to buy the Eagle Eye replica 94-95 style tails (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT) and they turned out to not fit well, I could probably swap over the outside lens to the stock tail housing, correct?
I know the HID conversion is a ***** but it is calling me. Not now, I'm not making nearly enough :P
I don't really plan on using the 94-95 hood ever; I like the pre-facelift + eyebrow spoiler look better.
Am I correct in assuming that tail-lights are tail-lights? I mean, if I were to buy the Eagle Eye replica 94-95 style tails (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT) and they turned out to not fit well, I could probably swap over the outside lens to the stock tail housing, correct?
#210
Super Member
Join Date: May 2003
Location: Boise, ID, USA
Posts: 890
Likes: 0
Received 4 Likes
on
4 Posts
300D, 500E, E420
Am I correct in assuming that tail-lights are tail-lights? I mean, if I were to buy the Eagle Eye replica 94-95 style tails (http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT) and they turned out to not fit well, I could probably swap over the outside lens to the stock tail housing, correct?
#212
MBWorld Fanatic!
Thread Starter
Fog light bulb color is a personal taste thing. I use standard clear/white bulbs, but you can use amber if you want. The reflector & lens create the proper fog beam pattern (wide / flat / low), the color does not make much difference, although some people prefer yellow (claiming there is reduced reflection, although that is debateable).
I have never bought aftermarket tail light lenses. The lens itself is what has a gasket which seals to the body, so if it's not perfect, there could be water leaks. The ones shown on eBay don't appear much different than the 94-95 stock tails, I would just get used 94-95 tails instead. I have those on both of my diesels.
#215
MBWorld Fanatic!
Thread Starter
Well, got a set of the 94-95 tails off a salvage 300ce at a body shop my friend goes to for the, get ready now, WHOPPING sum of:
12$ for both (plus drop off my stockies after I swap them out).
Not a bad deal right? I'm excited.
AAAND, I just got my DEPO euro lenses+clear corners and my MTEC H3 (3300k) and H4 (4350k) bulbs. Now, I just need to get the 6-pin adapters from the dealership tomorrow morning and I'll be in business. The salvage 300ce only had the one clip so I didn't bother.
Pics will come soon. I am like, crazy excited.
Clips are good, gaskets have some gaps. grr.. oh well, nothing some silicon can't fix. SHOULD be proper to begin with. Maybe I'll write them a nasty email.
12$ for both (plus drop off my stockies after I swap them out).
Not a bad deal right? I'm excited.
AAAND, I just got my DEPO euro lenses+clear corners and my MTEC H3 (3300k) and H4 (4350k) bulbs. Now, I just need to get the 6-pin adapters from the dealership tomorrow morning and I'll be in business. The salvage 300ce only had the one clip so I didn't bother.
Pics will come soon. I am like, crazy excited.
Clips are good, gaskets have some gaps. grr.. oh well, nothing some silicon can't fix. SHOULD be proper to begin with. Maybe I'll write them a nasty email.
Last edited by Saijin_Naib; 06-26-2009 at 07:45 PM.
#216
MBWorld Fanatic!
Join Date: Feb 2007
Location: Connecticut, New Haven
Posts: 1,297
Likes: 0
Received 1 Like
on
1 Post
95' AMG SeeThreeSix
Well, got a set of the 94-95 tails off a salvage 300ce at a body shop my friend goes to for the, get ready now, WHOPPING sum of:
12$ for both (plus drop off my stockies after I swap them out).
Not a bad deal right? I'm excited.
AAAND, I just got my DEPO euro lenses+clear corners and my MTEC H3 (3300k) and H4 (4350k) bulbs. Now, I just need to get the 6-pin adapters from the dealership tomorrow morning and I'll be in business. The salvage 300ce only had the one clip so I didn't bother.
Pics will come soon. I am like, crazy excited.
Clips are good, gaskets have some gaps. grr.. oh well, nothing some silicon can't fix. SHOULD be proper to begin with. Maybe I'll write them a nasty email.
12$ for both (plus drop off my stockies after I swap them out).
Not a bad deal right? I'm excited.
AAAND, I just got my DEPO euro lenses+clear corners and my MTEC H3 (3300k) and H4 (4350k) bulbs. Now, I just need to get the 6-pin adapters from the dealership tomorrow morning and I'll be in business. The salvage 300ce only had the one clip so I didn't bother.
Pics will come soon. I am like, crazy excited.
Clips are good, gaskets have some gaps. grr.. oh well, nothing some silicon can't fix. SHOULD be proper to begin with. Maybe I'll write them a nasty email.
AMGDave,
What bulbs on the current market would you consider to be the brightest within the correct wattage range??...melted housings = no fun.
#217
MBWorld Fanatic!
Thread Starter
Do your rear covers not fit like, 100% proper? Does vapor get in there? Did you seal them with silicon? I'm thinking of sealing them once I get the bulbs installed. Not likely to need to change them for a while.
Last edited by Saijin_Naib; 06-26-2009 at 11:22 PM.
#219
MBWorld Fanatic!
Thread Starter
The ideal ones for me are the US-spec ones for 94/95. You know, the ones with the white lens and the amber reflector on the side. I think that is the best, but these came with the headlights soooo. Also, the clips on these DON'T suck. I doubt they will be falling out like my other set of clear corners :\
I need my MTEC H4s and the 6-pin connectors before the headlights can go in. I'm going to the dealership soon to take care of the connectors, post office better take care of the H4s by day's end
(edit: USPS says arrival at unit, I will check on my way out to the dealership)
(edit edit: Parts closed on Saturday, no luck till Monday. Damnit!)
I need my MTEC H4s and the 6-pin connectors before the headlights can go in. I'm going to the dealership soon to take care of the connectors, post office better take care of the H4s by day's end
(edit: USPS says arrival at unit, I will check on my way out to the dealership)
(edit edit: Parts closed on Saturday, no luck till Monday. Damnit!)
Last edited by Saijin_Naib; 06-27-2009 at 11:50 PM.
#220
Super Member
Join Date: May 2003
Location: Boise, ID, USA
Posts: 890
Likes: 0
Received 4 Likes
on
4 Posts
300D, 500E, E420
#221
Super Member
Join Date: May 2003
Location: Boise, ID, USA
Posts: 890
Likes: 0
Received 4 Likes
on
4 Posts
300D, 500E, E420
Anything beyond that needs relays, larger wires, and preferably an alternator uprgade (this is pretty cheap & easy anyway). In my 500E Hella Euros with relays & larger wires, I have Osram Hyper 85/80, which put out *more* lumens on low beam than even higher-wattage Rally lights. The mega-watt bulbs do better on high beam, but I'm more interested in low-beam performance. The Hypers are availale from Peter Burgeson (click here). Note that the Hypers have a shorter life span than stock, same as any over-wattage Rally bulbs... so you won't want to use them as DRL's.
Here's the lumens ratings:
Bulb wattage, high/low:
==================================
Stock 60/55 = 1650/1000 lumens
Good +50 bulbs = 1800/1100
Hyper 70/65 = 2000/1350
Hyper 85/80 = 2400/1750 (more on low beam than stock on HIGH beam!)
Rally 100/90 = 2600/1500 (Philips or Narva)
Rally 130/100 = 3200/1600 (Philips or Narva)
#223
Super Member
Join Date: Nov 2002
Location: San Jose
Posts: 977
Received 0 Likes
on
0 Posts
300TE / 300E / 300CE
For stock wiring... AFAIK, the brightest H4 bulbs on the market (i.e., highest lumens) are Osram Hyper 70/65. These are a drop-in, zero mods. I have them in my Depos on the '93 300D.
Anything beyond that needs relays, larger wires, and preferably an alternator uprgade (this is pretty cheap & easy anyway). In my 500E Hella Euros with relays & larger wires, I have Osram Hyper 85/80, which put out *more* lumens on low beam than even higher-wattage Rally lights. The mega-watt bulbs do better on high beam, but I'm more interested in low-beam performance. The Hypers are availale from Peter Burgeson (click here). Note that the Hypers have a shorter life span than stock, same as any over-wattage Rally bulbs... so you won't want to use them as DRL's.
Here's the lumens ratings:
Bulb wattage, high/low:
==================================
Stock 60/55 = 1650/1000 lumens
Good +50 bulbs = 1800/1100
Hyper 70/65 = 2000/1350
Hyper 85/80 = 2400/1750 (more on low beam than stock on HIGH beam!)
Rally 100/90 = 2600/1500 (Philips or Narva)
Rally 130/100 = 3200/1600 (Philips or Narva)
Anything beyond that needs relays, larger wires, and preferably an alternator uprgade (this is pretty cheap & easy anyway). In my 500E Hella Euros with relays & larger wires, I have Osram Hyper 85/80, which put out *more* lumens on low beam than even higher-wattage Rally lights. The mega-watt bulbs do better on high beam, but I'm more interested in low-beam performance. The Hypers are availale from Peter Burgeson (click here). Note that the Hypers have a shorter life span than stock, same as any over-wattage Rally bulbs... so you won't want to use them as DRL's.
Here's the lumens ratings:
Bulb wattage, high/low:
==================================
Stock 60/55 = 1650/1000 lumens
Good +50 bulbs = 1800/1100
Hyper 70/65 = 2000/1350
Hyper 85/80 = 2400/1750 (more on low beam than stock on HIGH beam!)
Rally 100/90 = 2600/1500 (Philips or Narva)
Rally 130/100 = 3200/1600 (Philips or Narva)
Last edited by pifcat2; 06-29-2009 at 05:31 AM.
#224
Super Member
Join Date: May 2003
Location: Boise, ID, USA
Posts: 890
Likes: 0
Received 4 Likes
on
4 Posts
300D, 500E, E420
Photos of my one relay installation are at this link, the other install is at this link (scroll down to the bottom). I added a feed directly from the battery with one 8-gauge cable to each side (left & right), which splits into one 10-gauge to each relay, and then 12-gauge wires to the six-pole headlight connector.
That's a little overkill though, it would be fine to run one 10-gauge to each side, splitting to 12-gauge to each pair of relays, and then 14-gauge to the headlight connector. Use separate fuses for left & right sides so you won't lose all lights if a fuse blows - you'd just lose one side or the other.
#225
MBWorld Fanatic!
Join Date: Feb 2007
Location: Connecticut, New Haven
Posts: 1,297
Likes: 0
Received 1 Like
on
1 Post
95' AMG SeeThreeSix
For stock wiring... AFAIK, the brightest H4 bulbs on the market (i.e., highest lumens) are Osram Hyper 70/65. These are a drop-in, zero mods. I have them in my Depos on the '93 300D.
Anything beyond that needs relays, larger wires, and preferably an alternator uprgade (this is pretty cheap & easy anyway). In my 500E Hella Euros with relays & larger wires, I have Osram Hyper 85/80, which put out *more* lumens on low beam than even higher-wattage Rally lights. The mega-watt bulbs do better on high beam, but I'm more interested in low-beam performance. The Hypers are availale from Peter Burgeson (click here). Note that the Hypers have a shorter life span than stock, same as any over-wattage Rally bulbs... so you won't want to use them as DRL's.
Here's the lumens ratings:
Bulb wattage, high/low:
==================================
Stock 60/55 = 1650/1000 lumens
Good +50 bulbs = 1800/1100
Hyper 70/65 = 2000/1350
Hyper 85/80 = 2400/1750 (more on low beam than stock on HIGH beam!)
Rally 100/90 = 2600/1500 (Philips or Narva)
Rally 130/100 = 3200/1600 (Philips or Narva)
Anything beyond that needs relays, larger wires, and preferably an alternator uprgade (this is pretty cheap & easy anyway). In my 500E Hella Euros with relays & larger wires, I have Osram Hyper 85/80, which put out *more* lumens on low beam than even higher-wattage Rally lights. The mega-watt bulbs do better on high beam, but I'm more interested in low-beam performance. The Hypers are availale from Peter Burgeson (click here). Note that the Hypers have a shorter life span than stock, same as any over-wattage Rally bulbs... so you won't want to use them as DRL's.
Here's the lumens ratings:
Bulb wattage, high/low:
==================================
Stock 60/55 = 1650/1000 lumens
Good +50 bulbs = 1800/1100
Hyper 70/65 = 2000/1350
Hyper 85/80 = 2400/1750 (more on low beam than stock on HIGH beam!)
Rally 100/90 = 2600/1500 (Philips or Narva)
Rally 130/100 = 3200/1600 (Philips or Narva)
That's simply awesome! I will be picking up some Osram Hyper 70/65 for my Depos soon . Your Osram Hyper 85/80 setup sounds unbelievable, I would assume some form of a heatsink would be a good safety measure if one was planning on using them in a Depo housing? Kudos!