got a little bored today... few pix =)
#1
Super Member
Thread Starter
Join Date: Mar 2006
Location: HOUSTONNN, TX
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
got a little bored today... few pix =)
i know i need to bring the back down some more. thats nothing spring pads wont fix in the next few days. i just wanted to see how much room i had to work with before i started playing with the suspension more. but thats covered. the fitment came out great and im happy with the outcome.
up next, air suspension.
![](http://www.hi-upload.com/upload/uploaded2/on1.JPG)
![](http://www.hi-upload.com/upload/uploaded2/on2.JPG)
![](http://www.hi-upload.com/upload/uploaded2/on3.JPG)
![](http://www.hi-upload.com/upload/uploaded2/on4.JPG)
this is my daily and i went the exe route on this. wide body mods/wheel fitments arnt really my thing.
these have a nice poke to them put not too much. very conservative.
stay tuned for more. =)
up next, air suspension.
this is my daily and i went the exe route on this. wide body mods/wheel fitments arnt really my thing.
these have a nice poke to them put not too much. very conservative.
stay tuned for more. =)
#2
WOW, that's absolutely beautiful. It's great to finally see the car with the wheels on! The polished lip on those wheels is awesome! Nice job parking in front of a fire hydrant for the pictures!
![Smilie](https://mbworld.org/forums/images/smilies/smile.gif)
#3
Super Member
Thread Starter
Join Date: Mar 2006
Location: HOUSTONNN, TX
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
#4
MBWorld Fanatic!
Join Date: Apr 2006
Location: Houston, Texas
Posts: 3,062
Likes: 0
Received 0 Likes
on
0 Posts
Dora the Explorer
Hey Ryan, what are the exact specs on those wheels/tires. I love the fit and stance!
Good to see you around here again. Did you decide to keep the car or are you still selling it?
Good to see you around here again. Did you decide to keep the car or are you still selling it?
#5
Super Member
Thread Starter
Join Date: Mar 2006
Location: HOUSTONNN, TX
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
wheel specs are:
front: 18x8 +28
rear: 18x8 +23
tires are 225/35/18
Trending Topics
#8
Super Member
Join Date: Dec 2002
Location: Sherman Oaks
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
1992 300CE AMG Hammer Replica, 2004 C240, 2015 ML350
looks great.
What springs / spring pads are you running right now?
I need to bring the rear of my car up a little but I have 3 bump rear pads already. may have to replace my springs with slightly taller ones. I could bring my front lower on my car but have 2 bump pads, and would rather have a little gap and clearance. I barely clear parking blocks.. well most of them anyway right now as it is.
Keep up the good work, the car is looking hot.
What springs / spring pads are you running right now?
I need to bring the rear of my car up a little but I have 3 bump rear pads already. may have to replace my springs with slightly taller ones. I could bring my front lower on my car but have 2 bump pads, and would rather have a little gap and clearance. I barely clear parking blocks.. well most of them anyway right now as it is.
Keep up the good work, the car is looking hot.
#9
Super Member
Thread Starter
Join Date: Mar 2006
Location: HOUSTONNN, TX
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
looks great.
What springs / spring pads are you running right now?
I need to bring the rear of my car up a little but I have 3 bump rear pads already. may have to replace my springs with slightly taller ones. I could bring my front lower on my car but have 2 bump pads, and would rather have a little gap and clearance. I barely clear parking blocks.. well most of them anyway right now as it is.
Keep up the good work, the car is looking hot.
What springs / spring pads are you running right now?
I need to bring the rear of my car up a little but I have 3 bump rear pads already. may have to replace my springs with slightly taller ones. I could bring my front lower on my car but have 2 bump pads, and would rather have a little gap and clearance. I barely clear parking blocks.. well most of them anyway right now as it is.
Keep up the good work, the car is looking hot.
im thinking 2 or 3 for the rears.
but im not too sure. anyone have anything showing how much each of the pads lower mm wise?
thatd be a lot of help.
oh and i work for bank of texas now. no more wamu.
im making almost double what i was at wamu =)
#10
Super Member
Join Date: Jul 2005
Location: Denver,CO USA
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
"88 300CE- First Year Production
Looking good man I'll have my car looking good like that after the snow season, wish the streets here were in good condition, but weather has a more powerful effect than people think.
#11
MBWorld Fanatic!
Join Date: Oct 2004
Location: Orange County, CA
Posts: 5,816
Likes: 0
Received 0 Likes
on
0 Posts
W124's
Looks good Ryan, now I know how my Work wheels are going to look like when I get them in a couple months. Or Kinesis? ![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
So I take it you're officially going to keep the wheels?
the fitment of the wheels are really good. The stance is like my hammers but how do you plan on slamming it in the rear since the wheels are REALLY flushed?
I was at the Vogtland booth earlier and I was talking to one of the guys. He told me to contact him for some W124 springs. I think he's going to hook it up with Lorinser springs, LOL and he said they are pretty good.
![Wink](https://mbworld.org/forums/images/smilies/wink.gif)
So I take it you're officially going to keep the wheels?
the fitment of the wheels are really good. The stance is like my hammers but how do you plan on slamming it in the rear since the wheels are REALLY flushed?
I was at the Vogtland booth earlier and I was talking to one of the guys. He told me to contact him for some W124 springs. I think he's going to hook it up with Lorinser springs, LOL and he said they are pretty good.
#13
Super Member
Thread Starter
Join Date: Mar 2006
Location: HOUSTONNN, TX
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
but thx guys. =)
now time to play with pads!
#17
MBWorld Fanatic!
Join Date: Jul 2005
Location: Boston
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
is a German Tank
#22
MBWorld Fanatic!
Join Date: Jul 2005
Location: Boston
Posts: 3,094
Likes: 0
Received 0 Likes
on
0 Posts
is a German Tank
#25
Super Member
Join Date: Dec 2002
Location: Sherman Oaks
Posts: 882
Likes: 0
Received 2 Likes
on
2 Posts
1992 300CE AMG Hammer Replica, 2004 C240, 2015 ML350
I think I'm going to get some sportline springs or eibachs and take out the neuspeeds. the neuspeeds are the H&R's but rebranded with neuspeed on them. I like them, but my rear is low. I wish I could find a 4 bump or 5 bump rear pad. I need that clearance unless I want to flare out my fenders. rolling helped, but not much.
Hey Chris, on a side note. what is the diameter of our center cap opening on our wheels. I may have come up with something that will work, I just havent measured. I thought our were around 2 1/4"?...
Alon
Hey Chris, on a side note. what is the diameter of our center cap opening on our wheels. I may have come up with something that will work, I just havent measured. I thought our were around 2 1/4"?...
Alon