GT2359v
12-13-2011, 05:43 PM
#1
Newbie
Thread Starter
Join Date: Mar 2011
Location: Figueira da Foz - Portugal
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
w210 300td
GT2359v
Hello.
A friend of mine offered me a Garrett Gt2359vk from is broken inline 6 cyl 320 cdi.
I own a W210 300td 1997 Om606.962 engine and i want to install the GT23v on it.
I know that i have to get a vacuum valve and a 300Kpa Map sensor. Which is the Mercedes part number for the valve and sensor i need?
Is it very difficult to install it on my engine?
How much power should i get from my engine with this turbo without change my pump?
Here in Portugal no one uses these type of engines to upgrade, just VW 1.9 tdi...so i cannot talk to anybody.
A friend of mine offered me a Garrett Gt2359vk from is broken inline 6 cyl 320 cdi.
I own a W210 300td 1997 Om606.962 engine and i want to install the GT23v on it.
I know that i have to get a vacuum valve and a 300Kpa Map sensor. Which is the Mercedes part number for the valve and sensor i need?
Is it very difficult to install it on my engine?
How much power should i get from my engine with this turbo without change my pump?
Here in Portugal no one uses these type of engines to upgrade, just VW 1.9 tdi...so i cannot talk to anybody.
12-13-2011, 07:23 PM
#2
Hi. You're going to want to post this question to www.peachparts.com . There aren't many diesel guys over here that can answer those questions.
I'd suggest you get a chip tune program from SpeedTuning or another aftermarket tuner. You will need to increase your fuel pressure and other computer controlled engine management to accommodate the different turbo.
I'd suggest you get a chip tune program from SpeedTuning or another aftermarket tuner. You will need to increase your fuel pressure and other computer controlled engine management to accommodate the different turbo.
06-27-2012, 09:48 PM
#3
Newbie
Join Date: Jun 2012
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
E 320 CDI, G300D, 300D
Hello.
A friend of mine offered me a Garrett Gt2359vk from is broken inline 6 cyl 320 cdi.
I own a W210 300td 1997 Om606.962 engine and i want to install the GT23v on it.
I know that i have to get a vacuum valve and a 300Kpa Map sensor. Which is the Mercedes part number for the valve and sensor i need?
Is it very difficult to install it on my engine?
How much power should i get from my engine with this turbo without change my pump?
Here in Portugal no one uses these type of engines to upgrade, just VW 1.9 tdi...so i cannot talk to anybody.
A friend of mine offered me a Garrett Gt2359vk from is broken inline 6 cyl 320 cdi.
I own a W210 300td 1997 Om606.962 engine and i want to install the GT23v on it.
I know that i have to get a vacuum valve and a 300Kpa Map sensor. Which is the Mercedes part number for the valve and sensor i need?
Is it very difficult to install it on my engine?
How much power should i get from my engine with this turbo without change my pump?
Here in Portugal no one uses these type of engines to upgrade, just VW 1.9 tdi...so i cannot talk to anybody.
Thanks
06-28-2012, 04:21 AM
#4
Newbie
Thread Starter
Join Date: Mar 2011
Location: Figueira da Foz - Portugal
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
w210 300td
Hello.
no i did install it....i sold the car.
the turbo stays in place...
If you want it...make a offer...it´s very good condition..
no i did install it....i sold the car.
the turbo stays in place...
If you want it...make a offer...it´s very good condition..
06-28-2012, 11:15 AM
#5
Newbie
Join Date: Jun 2012
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
E 320 CDI, G300D, 300D
Trending Topics
07-06-2012, 04:09 AM
#9
Newbie
Thread Starter
Join Date: Mar 2011
Location: Figueira da Foz - Portugal
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
w210 300td
Hello.
If you want the turbo, you need to pay me 380€ plus postage....
this is the best i can do...
the turbo is in a very good condition...
thanks
If you want the turbo, you need to pay me 380€ plus postage....
this is the best i can do...
the turbo is in a very good condition...
thanks
