Hello!

AZN Optics is proud to present to the MBWorld community our line of 5W5 LEDs for the w211 model.

LED Description
These are super bright 360-degree shine LED bulbs with built-in load resistors,specially designed for European vehicles such as Mercedes, Audi, Volkswagen, Porsche or BMW, etc.

These OBC Error Free T10 Wedge LED bulbs will replace the stock 168, 194, 2825, 2821 or W5W bulbs.

Each LED bulb equips with 8 pieces High Power 1210 SMD CREE LED Chips, with built-in Load resistors. If you're not familiar with CREE, they're basically the best on the market. Most professional detailers prefer to use CREE LED chips for their lighting source for defect detection due to the high quality output.

Reviews
I have conducted a series of long tests and these LED bulbs light up perfectly and stay on error-free with no flickering. You can find reviews for these LEDs here:
https://mbworld.org/forums/c-class-w204/357337-azns-new-led-review-thread.html

Technical Specs
Led Quantity: 8 diodes pc 3528 smd
Lamp Socket: wedge
Emitting Color: 5000k white, 8000k blue
Available Voltage(V): DC12/24V
Luminous intensity:white 65lm
Average life time: ≥ 50,000 hours

Pricing and Payment
Pricing is as follows:
1 set (2 LEDs) of 5000K or 8000K LEDs will be $19
2 sets LEDs will be $36
3 sets LEDs will be $50
4 sets LEDs will be $65
PM me if you wish to purchase more than 4 sets.

I accept Paypal payment, cashier check, money order, or personal check, but for personal checks, will need to wait till clear before ship. Oh, and shipping is FREE! (to continental US and Canada). PM me if you're in some other country and I'll get shipping quote to you. I ship USPS first class to cut your costs. Tracking option is available at an additional cost. For you Canadians, just as an FYI, Canadian Customs is retarded and like to hold your shipment so expect some delays.

If you pay via Paypal, please send payment to aznoptics@gmail.com and PLEASE include your username, address, quantity, and color in your payment message to ensure no issues.



W211 (blue on left, white on right)

Blue (note: I'm running 8000K HIDs):


White (note: I'm running 8000K HIDs):


Both (note: I'm running 8000K HIDs):


CLK63 BS
[/quote]

 

two questions:

first are they plug and play or do i need to screw around with the hardware to get them to fit?
and two, which lights are they for? the headlights, side markers, the inside lights... etc

 

These are plug and play. No need to screw around with anything. Just remove your existing city light bulb and plug them in. Not sure if they will fit your sidemarkers, but if you can measure the dimensions, I can give you a better answer.

Here's a review of my LEDs on w211 by a forum member here.
https://mbworld.org/forums/e-class-w...ed-review.html

 

Mike! You're a sponsor now! Congrats! Best wishes!

 

do they go to the inside lights or the outside lights? (sorry don't know the offical name) or do they use the same bulbs?

 

What's up Terry. Yup. From the previous success of my group buy on the 204 forums, I've decided to start selling the same LEDs without the crazy MB markup. No way should people have to pay $30-50 for a set of quality LEDs.

They go on the inner (city lights) lights if I'm understanding you correctly. As you can see in the below pic, the lights that are actually ON are my LEDs. 8000K blues on the left and 5000K whites on the right.

 

sure why not, lets get a set of the blues ship to 95032

 

Payment info PM sent! Enjoy and remember to post pics!

 

bump

 

Bump! Just got mine today and they look great! Thanks again!

I had a little problem with the install tho.. When I pushed the LED system into the factory plug I noticed if I pushed it all the way in it would not work. I then pulled it slightly out of the plug and it worked fine!

So quick tip!

DO NOT push the led system ALL THE WAY IN THE PLUG! leave a little slack from the bottom!

Otherwise they are awesome!

 

I sure would like to see more pics of the white LED's.

 

Take a look here:
https://mbworld.org/forums/c-class-w204/357337-azns-new-led-review-thread.html

Lots of people have posted their results.

 

Has anyone done this yet?

 

I got mine today and they look great. One wasn't working but a quick e mail to Michael did it , He told me to flip it and is OK now. Thank You.

I tried to upload some pictures but it didn't work .

 

Good to hear the solution worked. Yes, 194 LEDs are polarity dependant. Have to plug them in the correct orientation. You basically have a 50/50 shot right off the bat at getting it right, but if it doesn't turn on instantly, take it off, flip it, and plug it back in. No big deal

 

bought a set of these, they look amazing. unfortunately one of them came broken but AZN Optics has already sent a new one! WOOT I was so happy I bought another set for my buddy. Will post pics next week. Looks amazing!!! Thank you

 

I also bought a set for my son, I will take it to Him next month.

 

Yeah, sorry. They're all packaged wrapped in bubble tape, but post office sometimes gets rough with them. I've had a couple that have broken in transit, but I've replaced all damaged in the mail. Trying to keep overhead low so I can pass on savings to you all and offer free shipping, even though I take a hit whenever post office damages my wares. As long as 99% of the rest of you get yours fine without having to raise postage fees for everyone, it's a better way imo. Unfortunately, if you fall in that 1%, just means a little more delay.

 

no worries

Btw, do you guys do internal lights? I'd like a set for my 211 for the dome lights and all the interior lights

 

Bump for a great product! Just got the sled back from the body shop yesterday, and installed the LED city lights. Great color (got the 5k), and no codes on my '07 W211. Out-effing-standing !

 

Stock bulb on left and 5000K White LED on right.

They seem pretty white and looks great.

Thanks to Mike!

 

Glad you all like the product. Committed to bringing you a high quality product without the typical MB markup prices.

 

Weekly bump. Running low on 5000K whites, but new batch order placed!

 

Got mine last week and finally had a chance to put them in last night. I waited to install them along with my new HID from DDM. The LED installation took less than 30sec and they look great.

 

Glad you like them! Yeah, install is really simple. If you can change a light bulb, you can change these LEDs so even if you're a modding newbie, this is one mod that isn't hard at all to tackle.