Roop94

[QUOTE=W211Virgin;7149415]You and me both...I have been looking for the CLS500 (5 spoke) wheels for AGES!!!


I looked for those for a few months and gave up lol I did find one set but were for 2k...uhh no sir! lol

Since most people want those wheels specifically, they are in somewhat high demand and classy, raised up their price :/ i couldn't afford em lol

Steve_k_550

Thrown the stock rims back on , one of my most favourite wheels

W211Virgin

[QUOTE=Roop94;7150581]I too have given up...plus I just spent 700 on tires so i have to use at least 75% before wanting to change wheels

W211Virgin

stock looks BEAUTIFUL!!!!

Steve_k_550

Lite my fire

Florian Siles

Repaired my center console triangular things with Epoxy ! Oh yeah lol

N_Jay

Yesterday I pulled the intake manifold.
Today I put the new (reman) in.
Tomorrow I finish buttoning it up.
It also got a new cam magnet, new crankcase vent, new plus in the back of the heads, and a new serpentine belt tensioner.

N_Jay

All buttoned up, purring like a kitten.
No leaks, no dripps, no error codes.
I go to back it out of the garage for a test drive, and find a broken front spring. Not even my fault, since I did not jack it up to do the work.

a100steaksauce

A quick vid of my mirrors

http://sendvid.com/4qupwx6x

Roop94

man i miss that alarm noise lol my key remote is broken and **** i have to use the blade annoying af

NewShockerGuy

Here we go... costing me money to do this mod...lol

I love it!

-Nigel

a100steaksauce

Bro it's only money.

scotty68

anybody have a list for torque specs on these ball joints etc?

Redwood415

brake pads and rotors last night. will need 1 front caliper replacement and a brake flush still. tricky with the SBC system.

Azeem

Hi N_Jay,

I have sent you an email regarding intake manifold. I also want to change mine, can you recommend a source and price? What other parts do I require if i want to change the manifold?
Thanks

N_Jay

The 270 is a different engine.

See my email.

Garcarcha

I replaced the two front air springs, and the valve block in my 2007 e550. I had to reinstall the old compressor because the new one had stripped threads on the outtake. The left rear of the car no longer sags and the front looks fantastic!

One minor problem. It now rides like a tank. I ordered a new compressor (from a different company) and hoping it's a pressure release valve issue, although I suspect not. One of the things I love most about this car is the smooth ride. If I wanted it to ride like a go cart I would have purchased a Vette!

Not sure what to do at this point.............

Steve_k_550

Have you already purchased the compressor as I have a new one with under 50km usage on it

cMazara

Just changed my 03 tail light with an oem 2007 tail light, both led avantgarde ones...
plug play no issues.

Roop94

pics? and how much u got em for

Rdrcr

Successfully diagnosed my leaky CDI injector. Parts on order.
Tomorrow, I'm replacing the engine and transmission mounts.

Mike

cMazara

Sure, here it goes.
Got them at 85 usd shipped including the bulb board from an eBay seller (a new home seller, not the typical store type eBay sellers), hard to find the other side for around the same price..


Only thing is that this are usdm and my car is euro specs.. Don't know if usdm have the second pull up light on the rear, the 'rear fog lights'. When I activate it nothing happens on the tails.

Roop94

Looks nice man. I would love to switch to 07-09 tail lights too but yea they are kinda expensive so i'll think about it.

But i am looking for a trunk lid/spoiler tho. A vendor here said a little over $100 but I see a few on amazon for $40 and i can get the tape for few extra bucks.

cMazara

http://www.ebay.com/itm/PAINTED-MERC...xU4azJ&vxp=mtr

I see this one paints it and sends it with the tape which is about fair..

N_Jay

I don't know if it was the same seller, but got on painted and ready to go with tape.
it is perfect, and it covers the small ding from a snow shovel that fell off the garage wall.