One Touch Close-sunroof
#1
Member
Thread Starter
Join Date: Nov 2002
Location: California
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
2003 E320
One Touch Close-sunroof
I have a 03 E320, I took it to the dealor due to the button for the sunroof control being cracked. The dealor will cover this under warranty however they stated that they could not just order the button, they had to order the whole light assembly.
Today I dropped the car off for that to be installed. When I picked the car up I noticed that the sunroof did ONE TOUCH tilt up and open but not ONE TOUCH tilt down or close ( must hold the button now for tilt down or close).
I also noticed that the PINCH sensor does not operate (sunroof reversing direction) when holding opposing force on the sunroof while button is held to the close position.
The Service Advison called the mechanic over to look at this and the mechanic told me this:
This may be a upgrade to the sunroof control. MB may have this programed in a "upgraded" way in that you now have to press AND HOLD the button to close it or tilt it down. He also stated that he will call MB and see what is going on with this.
What I invision is that I'm going to get an answer such as it is "operating as designed" (new and improved...yeah right!!)
I have searched past threads regarding "syncing" procedures but none of those have worked. I guess the question that I have at this point is:
1. Has anyone had this problem?
2. How to confirm that this is infact "operating as designed" if
they come back with that answer?
You would think that they would have something in writing that would state this "new" way of operating the sunroof IF in fact is designed that way. We all know the NEW cars on the lots are ONE TOUCH CLOSED as well....just like the rest of the windows.
Disipointed in the MBZ.....AGAIN
Today I dropped the car off for that to be installed. When I picked the car up I noticed that the sunroof did ONE TOUCH tilt up and open but not ONE TOUCH tilt down or close ( must hold the button now for tilt down or close).
I also noticed that the PINCH sensor does not operate (sunroof reversing direction) when holding opposing force on the sunroof while button is held to the close position.
The Service Advison called the mechanic over to look at this and the mechanic told me this:
This may be a upgrade to the sunroof control. MB may have this programed in a "upgraded" way in that you now have to press AND HOLD the button to close it or tilt it down. He also stated that he will call MB and see what is going on with this.
What I invision is that I'm going to get an answer such as it is "operating as designed" (new and improved...yeah right!!)
I have searched past threads regarding "syncing" procedures but none of those have worked. I guess the question that I have at this point is:
1. Has anyone had this problem?
2. How to confirm that this is infact "operating as designed" if
they come back with that answer?
You would think that they would have something in writing that would state this "new" way of operating the sunroof IF in fact is designed that way. We all know the NEW cars on the lots are ONE TOUCH CLOSED as well....just like the rest of the windows.
Disipointed in the MBZ.....AGAIN
#3
MBWorld Fanatic!
Re: One Touch Close-sunroof
Originally posted by CaptMike
I have a 03 E320, I took it to the dealor due to the button for the sunroof control being cracked. The dealor will cover this under warranty however they stated that they could not just order the button, they had to order the whole light assembly.
Today I dropped the car off for that to be installed. When I picked the car up I noticed that the sunroof did ONE TOUCH tilt up and open but not ONE TOUCH tilt down or close ( must hold the button now for tilt down or close).
I also noticed that the PINCH sensor does not operate (sunroof reversing direction) when holding opposing force on the sunroof while button is held to the close position.
The Service Advison called the mechanic over to look at this and the mechanic told me this:
This may be a upgrade to the sunroof control. MB may have this programed in a "upgraded" way in that you now have to press AND HOLD the button to close it or tilt it down. He also stated that he will call MB and see what is going on with this.
What I invision is that I'm going to get an answer such as it is "operating as designed" (new and improved...yeah right!!)
I have searched past threads regarding "syncing" procedures but none of those have worked. I guess the question that I have at this point is:
1. Has anyone had this problem?
2. How to confirm that this is infact "operating as designed" if
they come back with that answer?
You would think that they would have something in writing that would state this "new" way of operating the sunroof IF in fact is designed that way. We all know the NEW cars on the lots are ONE TOUCH CLOSED as well....just like the rest of the windows.
Disipointed in the MBZ.....AGAIN
I have a 03 E320, I took it to the dealor due to the button for the sunroof control being cracked. The dealor will cover this under warranty however they stated that they could not just order the button, they had to order the whole light assembly.
Today I dropped the car off for that to be installed. When I picked the car up I noticed that the sunroof did ONE TOUCH tilt up and open but not ONE TOUCH tilt down or close ( must hold the button now for tilt down or close).
I also noticed that the PINCH sensor does not operate (sunroof reversing direction) when holding opposing force on the sunroof while button is held to the close position.
The Service Advison called the mechanic over to look at this and the mechanic told me this:
This may be a upgrade to the sunroof control. MB may have this programed in a "upgraded" way in that you now have to press AND HOLD the button to close it or tilt it down. He also stated that he will call MB and see what is going on with this.
What I invision is that I'm going to get an answer such as it is "operating as designed" (new and improved...yeah right!!)
I have searched past threads regarding "syncing" procedures but none of those have worked. I guess the question that I have at this point is:
1. Has anyone had this problem?
2. How to confirm that this is infact "operating as designed" if
they come back with that answer?
You would think that they would have something in writing that would state this "new" way of operating the sunroof IF in fact is designed that way. We all know the NEW cars on the lots are ONE TOUCH CLOSED as well....just like the rest of the windows.
Disipointed in the MBZ.....AGAIN
#5
Senior Member
Join Date: Mar 2003
Location: Suburban Chicago
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
2013 GL550
I have a 10/02 build and would love to have one-touch close. Always thought it kinda weird that I can open it with one touch but have to hold it down to close it. Same for tilt. I'll stop by the dealer and give a few new ones a try. That is one software/hardware upgrade I want! I like the way my S4 did it with the dial - just turn it to the desired opening and forget it.
Bruce
Bruce
#6
Member
Join Date: Jul 2003
Location: ATLANTA,GA.
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
2003 E500 SPORT
![Question](https://mbworld.org/forums/images/icons/icon5.gif)
Call the MB customer service line with the question.
Also, when the 2004 models come in check the function of the new cars to see who is right...........bet me that MB did not change the design and function.
D.
Also, when the 2004 models come in check the function of the new cars to see who is right...........bet me that MB did not change the design and function.
D.
Trending Topics
#8
Super Member
Join Date: Aug 2002
Location: Northern VA
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
2003 MB E500
My first E500 had one touch open but not close. My replacement car is the same way. At first I couldn't get it to open with one touch until I realized I was not pushing the button all the way. After that no problem.
Bmms8, you are the only one that I know of that has one button close too. Neither of my cars did that.
Bmms8, you are the only one that I know of that has one button close too. Neither of my cars did that.
#9
MBWorld Fanatic!
Originally posted by rayscar
My first E500 had one touch open but not close. My replacement car is the same way. At first I couldn't get it to open with one touch until I realized I was not pushing the button all the way. After that no problem.
Bmms8, you are the only one that I know of that has one button close too. Neither of my cars did that.
My first E500 had one touch open but not close. My replacement car is the same way. At first I couldn't get it to open with one touch until I realized I was not pushing the button all the way. After that no problem.
Bmms8, you are the only one that I know of that has one button close too. Neither of my cars did that.
mb, i dont think i made myself clear, but i do have to press it past resistance.
#10
Almost a Member!
Join Date: Jan 2003
Location: New York City
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
E500
Your tech must have ordered you the wrong parts. My understanding is that regular sunroofs have one touch open/closing where as Pana roofs only have one touch opening only.
#12
Super Member
Join Date: Sep 2002
Location: New Jersey, USA
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
W211 & Q7
if the wrong part can fit and work. I will tell my dealer to install it for my pano.
electric equipments is the weakest side in mb. not only on-touch roof, how about one-touch memory seat? (my bimmer has one-touch memory seat feature. why do I have to keep pressing memory button in e -- because I select the wrong brand?)
Otto
electric equipments is the weakest side in mb. not only on-touch roof, how about one-touch memory seat? (my bimmer has one-touch memory seat feature. why do I have to keep pressing memory button in e -- because I select the wrong brand?)
Otto
#13
Super Member
Join Date: Sep 2002
Location: New Jersey, USA
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
W211 & Q7
one-touch for pano roof
the penalty for me in picking the wrong brand is
when I hold the button to close the pano roof, if my finger hold it "too long" (how do I knows it is fully close???) the shade will be triggered. should mb provide a different button or a smart way in sharing a roof button?
Otto
when I hold the button to close the pano roof, if my finger hold it "too long" (how do I knows it is fully close???) the shade will be triggered. should mb provide a different button or a smart way in sharing a roof button?
Otto
#16
Senior Member
perhaps there is a difference if you have the pano roof. i have to hold my switch down to close w/ the pano roof? do you guys w/ the one touch close have the normal sunroof?
#17
Almost a Member!
Join Date: Dec 2002
Location: Chicago suburbs
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
2003 E500
One-touch open/close/tilt works fine on mine, built 5/03. Owner's manual also indicates one-touch function, but you must "move the switch past the resistance point" (pg. 187).
#18
Out Of Control!!
Join Date: Jul 2003
Location: North Scottsdale, AZ
Posts: 15,903
Received 4,435 Likes
on
3,152 Posts
'71 Pinto
Built 11/02 - sunroof has 'one touch' open / close for both full open & tilt positions inclusive of resistance safety feature.
#19
When I received my 12/02 build E500, the salesperson noticed that the one-touch open did work, but not the one-touch close. Service replaced the motor and all has been well since.
#20
Almost a Member!
Join Date: Jun 2003
Location: So. Cal.
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Lakerholic
MY 5/03 Build, E320 Sport requires holding the button to close the tilt. It is one touch open, close and tilt up, however.
MY 5/03 Build, E320 Sport requires holding the button to close the tilt. It is one touch open, close and tilt up, however.
#22
MBWorld Fanatic!
Join Date: Oct 2002
Location: Washington State
Posts: 3,690
Likes: 0
Received 2 Likes
on
2 Posts
E-500
Both my September '02 build pre-nav and the replacement I picked up today have the one-touch open/close/tilt on the sun roof.
Check it out again Mike....If it is not operating right, talk to the service manager. No excuse for them not to know the proper operation of the equipment.
You have had more than your share of problems and wierd happenings
Check it out again Mike....If it is not operating right, talk to the service manager. No excuse for them not to know the proper operation of the equipment.
You have had more than your share of problems and wierd happenings
![EEK!](https://mbworld.org/forums/images/smilies/eek.gif)
#23
Senior Member
I've learned so much from all of you! Thanks! Anyway, I read this yesterday and tried this feature today. I found that I have one-touch open on my pano (not one-touch for closing, however). Nice to know!
#24
Super Member
Join Date: Sep 2002
Location: New Jersey, USA
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
W211 & Q7
I found that I have one-touch open on my pano (not one-touch for closing, however).
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)
Last edited by Otto; 08-14-2003 at 11:13 AM.
#25
Super Member
Join Date: Aug 2002
Location: Northern VA
Posts: 924
Likes: 0
Received 0 Likes
on
0 Posts
2003 MB E500
Originally posted by Otto
same as mine. (may be because of pano
-- pano uses the same button for closing pano and shade.)
same as mine. (may be because of pano
![Confused](https://mbworld.org/forums/images/smilies/confused.gif)