So who's used BenzNinja?
#51
MBWorld God!
![](https://staticssl.ibsrv.net/autocomm/EvoM/fcotmicon.gif)
Join Date: Jul 2010
Location: on my way
Posts: 30,658
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
And there it be!
3 pages of dedication to Peter!
Where did Psycho go??
3 pages of dedication to Peter!
Where did Psycho go??
The following 2 users liked this post by hyperion667:
BenzNinja (06-04-2021),
waynerjohnson (02-02-2022)
#52
Member
Join Date: Sep 2016
Location: San Diego
Posts: 96
Likes: 0
Received 23 Likes
on
20 Posts
2002 CLK 430, 2005 CL600, 2009 Smart Fortwo
Thanks Peter!
I too have purchased Peter's software and followed his advice. I live in California and there is a huge time zone change between Peter's location and mine and he works with me to get the help I need. I would recommend him to anyone.
The following 2 users liked this post by K McCarthy:
BenzNinja (06-04-2021),
waynerjohnson (02-02-2022)
#53
Junior Member
This thread is very informative and it sounds like Peter is a great asset to the MB community. I must admit when I saw several of his posts, (and upon 1st glance), I did not know what services he offered, now I do.
Peter, keep up the good work!
Peter, keep up the good work!
The following 3 users liked this post by Greg B.:
The following users liked this post:
waynerjohnson (02-02-2022)
#55
MBWorld Fanatic!
He just deletes his threads when I've asked questions on what services he offers in greater detail....so I'll just make a thread myself then since transparency doesn't seem like something he wants to show.
All his (5) star reviews are from MBWorld he says....
So where are the real users here? What's your experience?
All his (5) star reviews are from MBWorld he says....
So where are the real users here? What's your experience?
Regards,
Joe
The following 3 users liked this post by Valvestud:
#56
Junior Member
Join Date: Jan 2019
Location: Columbus, Ohio
Posts: 26
Likes: 0
Received 6 Likes
on
4 Posts
2008 ML350, 2005 S55 AMG (Sold), 2001 E55 AMG (Sold)
I can vouch for him 100%. He is legit. I paid for a Xentry install and he went above and beyond; he'll tell you exactly what to laptop to buy, what STAR to buy, he teaches how to use it, how to look through the menus, etc. He ran a full diag for me and make sure everything was good. I had a few errors and he even gave me part numbers and showed me WIS documents.
If you haven't gotten the Analog Sport+ TCU tune installed by him... do it. I tested DTK TCU tune and his "A" mode side by side on the circuit track, and his is wayy better.
Also, don't you know that he was able to pull the ABC2 Nurburbring Map from an SL and install it on other models? Yea he knows his stuff.
If you haven't gotten the Analog Sport+ TCU tune installed by him... do it. I tested DTK TCU tune and his "A" mode side by side on the circuit track, and his is wayy better.
Also, don't you know that he was able to pull the ABC2 Nurburbring Map from an SL and install it on other models? Yea he knows his stuff.
The following 2 users liked this post by Saeo:
BenzNinja (07-21-2021),
waynerjohnson (02-02-2022)
#57
MBWorld God!
![](https://staticssl.ibsrv.net/autocomm/EvoM/fcotmicon.gif)
Join Date: Jul 2010
Location: on my way
Posts: 30,658
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
Peter, time to make some T shirts
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
The following 3 users liked this post by hyperion667:
#58
I’ve been using Peter’s software for coming up to a year. It’s been flawless and any issues (usually user error(me)) are sorted rapidly.
Peter’s software is brilliant, his knowledge even better. However, what you cannot put a price on is his support, and that was what it was all about for me. I’m not the most tech savvy, and the support was and is, far more valuable than anything.
I was put on to Peter by recommendation so website etc was not something i cared to look in to. His services speak for them self in my experience.
I hope this helps any prospective user.
Peter’s software is brilliant, his knowledge even better. However, what you cannot put a price on is his support, and that was what it was all about for me. I’m not the most tech savvy, and the support was and is, far more valuable than anything.
I was put on to Peter by recommendation so website etc was not something i cared to look in to. His services speak for them self in my experience.
I hope this helps any prospective user.
The following 2 users liked this post by Dom Evola:
BenzNinja (06-06-2021),
waynerjohnson (02-02-2022)
#59
The following users liked this post:
waynerjohnson (02-02-2022)
The following users liked this post:
waynerjohnson (02-02-2022)
#61
He really knows his stuff.
We've (our shop) has used him several times. He's very knowledgeable, responds almost immediately and has been able to fix our issue every single time we used him, except once.
I highly recommend him.
I highly recommend him.
The following 2 users liked this post by Shane.78:
BenzNinja (06-08-2021),
waynerjohnson (02-02-2022)
#62
Member
I don't have time to write a novel, but glad to share. BenzNinja is great to deal with. We first did business over 3 years ago with a stubborn 722 we could not get programmed. Peter spent well over 8 hours helping us diagnose. Over the years, we have diagnosed problems, updated software and firmware, fixed ridiculous installs of Xentry, and just recently we've gotten into some ECU stuff. If you're looking for front end loaded service with a lot of thank yous and empty promises, look else where. If you're looking for someone who is passionate, hard working, extremely knowledgeable, and willing to go give it all it takes to solve your problem, Peter is you go to.
Over the years we have exchanged money and never once have i had an issue or problem with Peter holding up to his end of the bargin. Peter is as sincere and honest as they come.
Over the years we have exchanged money and never once have i had an issue or problem with Peter holding up to his end of the bargin. Peter is as sincere and honest as they come.
The following 2 users liked this post by PrecisionEngine:
BenzNinja (06-08-2021),
waynerjohnson (02-02-2022)
#63
MBWorld Fanatic!
I can vouch for him 100%. He is legit. I paid for a Xentry install and he went above and beyond; he'll tell you exactly what to laptop to buy, what STAR to buy, he teaches how to use it, how to look through the menus, etc. He ran a full diag for me and make sure everything was good. I had a few errors and he even gave me part numbers and showed me WIS documents.
If you haven't gotten the Analog Sport+ TCU tune installed by him... do it. I tested DTK TCU tune and his "A" mode side by side on the circuit track, and his is wayy better.
Also, don't you know that he was able to pull the ABC2 Nurburbring Map from an SL and install it on other models? Yea he knows his stuff.
If you haven't gotten the Analog Sport+ TCU tune installed by him... do it. I tested DTK TCU tune and his "A" mode side by side on the circuit track, and his is wayy better.
Also, don't you know that he was able to pull the ABC2 Nurburbring Map from an SL and install it on other models? Yea he knows his stuff.
Regards,
Joe
The following 2 users liked this post by Valvestud:
BenzNinja (06-08-2021),
waynerjohnson (02-02-2022)
The following users liked this post:
waynerjohnson (02-02-2022)
#65
King Benz Ninja
I hope I am replying to the correct person here ( the one who asked: who's used Benz Ninja? ),
If so, My son Mad Max and I have used him for quite some time on C280, S500, S430, CL500 (two of them) , CLK350, R350.... an a couple more. We love our Benz's and he (Peter) is the most knowledgeable Benz person ever. And he is quick to respond and solve all issues.
Tom Jenne
If so, My son Mad Max and I have used him for quite some time on C280, S500, S430, CL500 (two of them) , CLK350, R350.... an a couple more. We love our Benz's and he (Peter) is the most knowledgeable Benz person ever. And he is quick to respond and solve all issues.
Tom Jenne
The following 3 users liked this post by TomsBenzs:
#66
MBWorld God!
![](https://staticssl.ibsrv.net/autocomm/EvoM/fcotmicon.gif)
Join Date: Jul 2010
Location: on my way
Posts: 30,658
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
ps2cho are you content yet? LMFAO!
The following 3 users liked this post by hyperion667:
#67
MBWorld God!
![](https://staticssl.ibsrv.net/autocomm/EvoM/fcotmicon.gif)
Join Date: Jul 2010
Location: on my way
Posts: 30,658
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
The following 2 users liked this post by hyperion667:
BenzNinja (10-25-2021),
waynerjohnson (02-02-2022)
#68
SPONSOR
iTrader: (4)
Join Date: Dec 2019
Location: WWW.BENZNINJA.COM
Posts: 2,680
Received 818 Likes
on
634 Posts
WWW.BENZNINJA.COM
I would like to thank all the members that trusted me since the beginning of this great adventure building a service of excellency that did not exist !
![](https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/501x586/capture_ed5859ed6de030467a321b35fdca9afde2a052aa.png)
And if their was one unsatisfied person, he would be the first to post....
just hoping that all internet trolls know this now and go back to twitter to express their frustrations
Last edited by BenzNinja; 06-09-2024 at 07:58 AM.
The following 7 users liked this post by BenzNinja:
djborden (12-30-2021),
Jamsk (07-14-2021),
kjb55 (06-18-2021),
Marius Vangen (07-21-2021),
robbieas (06-17-2021),
and 2 others liked this post.
#69
Add my name to the "real-user" list...
All the positive reviews are legit. Peter will help you purchase the hardware and software you need to diagnose your car at dealer level. Peter is smart and quick. He provides 100% reliable advice day and night. He has diagnosed my 2002 CL600, fixed problems, and provided constant upgrades and advice for 2 years since my first purchase.
I'm a card-carrying supporter of Peter. Don't hesitate to message me with any questions you have about his service.
I'm a card-carrying supporter of Peter. Don't hesitate to message me with any questions you have about his service.
The following 3 users liked this post by BayArchitect:
#70
Junior Member
I can vouch for Peter as well. Ultra-helpful, the guy never seems to sleep. Always have my questions answered promptly, and all requests completed and resolved. You can't go wrong with this guy.
The following 3 users liked this post by mikekaro:
The following 2 users liked this post by BenzNinja:
acpmc (11-15-2022),
waynerjohnson (02-02-2022)
The following 2 users liked this post by dattorob:
BenzNinja (07-18-2021),
waynerjohnson (02-02-2022)
The following 2 users liked this post by dattorob:
BenzNinja (07-18-2021),
waynerjohnson (02-02-2022)
#74
MBWorld God!
![](https://staticssl.ibsrv.net/autocomm/EvoM/fcotmicon.gif)
Join Date: Jul 2010
Location: on my way
Posts: 30,658
Received 3,399 Likes
on
2,844 Posts
2012 CLS63
ps2cho how ya doing?
![rolf](https://mbworld.org/forums/images/smilies/rofl.gif)
The following users liked this post:
waynerjohnson (02-02-2022)
#75
Junior Member
BenzNinja is "The Man"
For all those that have hesitation purchasing and working with Peter (The Benz Ninja)... I can tell you this guy is more that Legit! He can do what he claims.
He is quick to help when you have issues and knows his stuff.
If you enjoy working on your Benz and need a computer system to aide in your passion.... let The BenzNinja hook you up!!
I have been in business almost 30 years. Not in the automotive business (I own a small machine shop). I have purchase many pieces of software over the years. I can tell you I have NEVER had the kind of SERVICE Peter offers.
He has saved me a LOT OF MONEY and has NEVER fallen short on his promise.
I consulted him and purchased exactly what he told me to get. The cost was more than acceptable and the complete system performs perfect.
Like I said... If you have a passion for your Benz and enjoy the DIY realm.... The BenzNinja's sytem is a must have for your tool box
All the best everyone,
Mark
He is quick to help when you have issues and knows his stuff.
If you enjoy working on your Benz and need a computer system to aide in your passion.... let The BenzNinja hook you up!!
I have been in business almost 30 years. Not in the automotive business (I own a small machine shop). I have purchase many pieces of software over the years. I can tell you I have NEVER had the kind of SERVICE Peter offers.
He has saved me a LOT OF MONEY and has NEVER fallen short on his promise.
I consulted him and purchased exactly what he told me to get. The cost was more than acceptable and the complete system performs perfect.
Like I said... If you have a passion for your Benz and enjoy the DIY realm.... The BenzNinja's sytem is a must have for your tool box
All the best everyone,
Mark
The following 3 users liked this post by Thrasher5621: