Blk out turn signal
I tried finding one for our cars but had no luck.
You can ask a shop to paint it but I don't think it's reversible if you were to turn in the lease or decide to go back to stock.

If I had the right tools I am sure it would have taken only 10mins and no blood shed. lol
Trending Topics

If I had the right tools I am sure it would have taken only 10mins and no blood shed. lol
The Best of Mercedes & AMG
Personally, I find it pointless to spend the cash on ordering a black one, and having to go through the install process, when you can easily get it wrapped.
Personally, I find it pointless to spend the cash on ordering a black one, and having to go through the install process, when you can easily get it wrapped.

TIA.
Huy
Installing the smoked side markers from ebay takes all of ten minutes, max. And that's after a cocktail on a Sunday afternoon...
1) turn the steering wheel to the opposite side your are working on
2) pull the front fender liner from the fender with a good yank; make sure you don't lose the fastener that pops out
3) turn the bulb socket counterclockwise and pull the bulb and socket out from the inside of the lens
4) use your fingers to pull out on the rearmost side of the lens and-once it is free from the fender-pull backwards towards the rear of the car to free the front of the lens from the bracket inside the fender
5) reverse the process with new lens and then reinstall the plastic fastener that popped out
Just be careful and everything will be irie.
1) turn the steering wheel to the opposite side your are working on
2) pull the front fender liner from the fender with a good yank; make sure you don't lose the fastener that pops out
3) turn the bulb socket counterclockwise and pull the bulb and socket out from the inside of the lens
4) use your fingers to pull out on the rearmost side of the lens and-once it is free from the fender-pull backwards towards the rear of the car to free the front of the lens from the bracket inside the fender
5) reverse the process with new lens and then reinstall the plastic fastener that popped out
Just be careful and everything will be irie.








