W212 on 20" AvantGarde M310 - Matte Black
05-31-2012, 09:52 PM
#1
Former Vendor of MBWorld
Thread Starter
W212 on 20" AvantGarde M310 - Matte Black
Hey guys,
Check out this set of 20x8.5 all around AvantGarde M310 in Matte Black finish on a W212 E350.
The wheels are low pressure cast, under $2,000 for a set, hubcentric, built for the E Class specifically, concave and available in matte black and silver machined face.
Full photoshoot to follow.
For pricing and ordering information - send us a PM, email us or give us a call
Check out this set of 20x8.5 all around AvantGarde M310 in Matte Black finish on a W212 E350.
The wheels are low pressure cast, under $2,000 for a set, hubcentric, built for the E Class specifically, concave and available in matte black and silver machined face.
Full photoshoot to follow.
For pricing and ordering information - send us a PM, email us or give us a call
Last edited by CampioniShop; 06-01-2012 at 02:12 PM.
06-01-2012, 01:33 PM
#6
Former Vendor of MBWorld
Thread Starter
06-01-2012, 02:03 PM
#7
MBWorld Fanatic!
What I am saying is that the same wheels listed on eBay are available in rear fitment of 20x10 et35 only, which is 5-15mm (depending of tires' width used) too aggressive even for a flush look. What are the offsets you have them in? Saying "built for the E Class specifically" just won't do.
.....
Your competitor in a different thread just confirmed it (same picture) - 20x10 et35. The car in the picture is lowered and its unknow what else was done to "make" it fit. On a stock, unmodified W212, these wheels will be passed fendres by 5mm with 265/30-20 tire, by about 10mm with 275/30-20 and almost 15mm with 285/25-20.
.....
Your competitor in a different thread just confirmed it (same picture) - 20x10 et35. The car in the picture is lowered and its unknow what else was done to "make" it fit. On a stock, unmodified W212, these wheels will be passed fendres by 5mm with 265/30-20 tire, by about 10mm with 275/30-20 and almost 15mm with 285/25-20.
Last edited by threeMBs; 06-01-2012 at 02:13 PM.
Trending Topics
06-01-2012, 02:26 PM
#10
Former Vendor of MBWorld
Thread Starter
If you are looking for something in 20" staggered fitment, we have these in stock and available right now:
https://mbworld.org/forums/e-class-w...t-concave.html
https://mbworld.org/forums/e-class-w...t-concave.html
06-01-2012, 05:52 PM
#11
Member
~~ What, no Happy Hour for you today??? 
Oh, BTW, to the OP...that's an f'ing hot pic!!!
06-01-2012, 06:13 PM
#12
MBWorld Fanatic!
Well I never mislead anyone. I want to be treated likewise. If I see something obviously misleading, regardless if intended or not (the OP did change the original message after my comments), I will comment on as most people are not knowlageable enough to know and will bite. These are the message boards to benefit most, not just some. If "sponsors" do not like comments, they can post in classifieds that were specially designed for that.
