yiannossavva

This is a 360 back camera, not reversing camera.
i have reversing camera and i need this one :-)
if you like we can change the cameras
The part number you need is A0008201203

yiannossavva

This is a 360 back camera, not reversing camera.
i have reversing camera and i need this one :-)
if you like we can change the cameras
The part number you need is A0008201203

deimosian

This thread is awesome, definitely bookmarking it... not a fan of the big screens, but I really want to upgrade my '15 E250 Turbodiesel to NTG51.

I saw a reference to a shop in NL that can do it, but is there any place to have this done by a pro in the USA? Or would it have to be a DIwhy here?

deimosian

That looks like ab aftermarket big screen install, not the overhaul of the factory headunit and whatnot, or did you do both? If so how much trouble was repinning the harness?

deimosian

Oh, neat, but I'm just looking for the 5.1 system in my W212, not a larger screen... not even sure if that'd fit a W212.

cobrook

Hi Chris, I have a 2013 GL350 X166, which has the Comand NTG 4.7 with navigation in it. I am assuming that this can also be upgraded to the 5S1. What parts would I need and where is the best place to get them?

Thanks in advance

aafilho

Can anyone get the pin code for my ntg 5*1.

Thank you guys.

aafilho

Thanks. But for that price I’ll try something else.

aafilho

Thank you a lot. How can i enter the code on my head unit ? Is there only one way or more to do that ? Currently is showing this screen, I noticed that if i pull out the (pink) wire from the small black connector, the unit won’t go into anti theft mode, but it wouldn’t let me change the vehicle settings as the unit thinks the key is no on.....

michael130509

Hello

I read your thread and decided to do the conversion to a friend's car w212 model 2014
The car has ntg4.5 audio 20 and want to retrofit the ntg5s1 audio 20.
I read and print the wiring diagrams for both ntg4.5 and ntg5s1 and made all the necessary modifications.

Managed to unlock the ntg5s1 and the screen powered on but now I have problem with the can bus body and also the rotary controller doesn't work.
I get a message that after 3 minutes the the radio will switch off.
I reppined the cables for the can body from the original quadlock pin 11 to new block c pin 9 for cab high and from pin 9 to block pin 3 can low.
What I am doing wrong?
Also the original rotary controller which was installed to the car was the one with four buttons but I don't get any power to that

Any help would be appreciated

Kimd Regards
Michael

michael130509

Thanks for the reply.
The car had already the rotary with the four buttons exactly like the one from that of ntg5s1 despite it has ntg4.5.
About can bus body I reppined the cable and use the can bus from the ntg4.5
The radio behave like it has no signal from can bus

michael130509

Thanks for the reply.
The car had already the rotary with the four buttons exactly like the one from that of ntg5s1 despite it has ntg4.5.
About can bus body I reppined the cable and use the can bus from the ntg4.5
The radio behave like it has no signal from can bus

michael130509

Yes you right. I didn't know that there is difference , i will find the controller first.
I noticed the most had also dab which the car doesn't have but I didn't touch it because I wanted to find the can bus problem.

About the wake up do you mean most wake up pin 16?
Is there any case the issue with can bus to be from most components?


For can bus I used the cables which came to the ntg4.5 is that correct or I have to pull cables from the can bus central connectors.

forsyn

Hi.
what kind of cable do you purchased?

forsyn

Hi michael.
Can you share the wiring diagram for ntg4.5 and 5s1?

michael130509

Thank you Chris. It worked!!!!
I did today , I replaced also the controller everything worked good.
I had a small issue with the usb module but I fixed it.

michael130509

Hello
I didn't purchased any cable.
I made my own. You have to make four wires to the obd port and repin some others.

michael130509

I read the wiring diagrams for ntg4.5 and ntg5s1 and make the changes.
Do you have access to the wis? You can print the wiring diagrams for both systems and see the differences there.
You have to change the can bus, telematics bus, the microphone cables and to wire new cables 4 to obd and 3 cables for usb.

bassamfahs

i have mercedes benz w212 E class 350 214 include the traffic sign recognition, the car is shipped from Germany to Lebanon , that system is working for one day only the first day the car arrived, and after that day the traffic recognition sign system is not operational, can anybody help me

BeEst Regards

labik

I am looking for a video cable scheme - two blue connector
I have connectors.
Diagram please.

labik

I change a new joystick with 4 buttons and joystick not work. Old joystick with 2 buttons not work too
Why ?

labik

How do you recognize the right one ?

labik

Maybe someone will write the part number of the joystick with two buttons from the manual and part nr joystick with four buttons from automatic gear ?

labik

Hi.
I installed NTG5 to w212 prelift. Finally it looks like this.

labik

I can't find this option. I "m blind ?
Where is it ?
I work on HU5s1.cbf file.
Thx