10.25 inch android headunit installed
From what I am told, it's the 1st anyone has had a issue like this. Engineers are looking into this and should get back to me soon, hopefully.
Do you have any idea on what I should do?
I have an issue with my V2 android screen. All works well except for the mileage. My car shows 54471km and the screen over 3 million km. It does not match. I did the UI upgrade and the CAN upgrade, but still same issue. Do you know if I remove the fuse box as it is posted this will resolve my issue?
Is there something else I need to do?
I have a 2011 E350 cabriolet (NTG4).
Thank you very much.




I have an issue with my V2 android screen. All works well except for the mileage. My car shows 54471km and the screen over 3 million km. It does not match. I did the UI upgrade and the CAN upgrade, but still same issue. Do you know if I remove the fuse box as it is posted this will resolve my issue?
Is there something else I need to do?
I have a 2011 E350 cabriolet (NTG4).
Thank you very much.
I have an issue with my V2 android screen. All works well except for the mileage. My car shows 54471km and the screen over 3 million km. It does not match. I did the UI upgrade and the CAN upgrade, but still same issue. Do you know if I remove the fuse box as it is posted this will resolve my issue?
Is there something else I need to do?
I have a 2011 E350 cabriolet (NTG4).
Thank you very much.
The Best of Mercedes & AMG
I am sure it is different from the pre-face lift model so if anyone has installed it on a 2014-2015 E350 I would appreciate some pointers as to where to put all the cables.
Also, there is a constant buzz / hiss coming from the speakers as soon as the unit is turned on, even without the engine running.
As soon as the key is in ACC position one, the noise is there. When I start the engine, it is the same noise and the pitch doesn't change when the rev goes up so it's not interference from the engine.
I ordered a suppressor, coming today, but I wonder if someone else had a similar problem and what was the solution.
I am sure it is different from the pre-face lift model so if anyone has installed it on a 2014-2015 E350 I would appreciate some pointers as to where to put all the cables.
Also, there is a constant buzz / hiss coming from the speakers as soon as the unit is turned on, even without the engine running.
As soon as the key is in ACC position one, the noise is there. When I start the engine, it is the same noise and the pitch doesn't change when the rev goes up so it's not interference from the engine.
I ordered a suppressor, coming today, but I wonder if someone else had a similar problem and what was the solution.
Do you have small hands or did you use some tool / trick?
I even removed the glove box to see if there is space beside it but there isn't any.
, i haven't use tools or tricks, after I have tried for 2-3 times , I calmed down and i manage to insert the Command... its enough space behind and somehow under the command for the cables, but i don't want to take it out again
)
, i haven't use tools or tricks, after I have tried for 2-3 times , I calmed down and i manage to insert the Command... its enough space behind and somehow under the command for the cables, but i don't want to take it out again
)yes finally got this resolved with a couple of upgrades. However, a new issue appeared. When watching a movie or music via bluetooth, only the right side speakers work, not the left. I am waiting from the seller on a solution on this. If you want mail me and I can email you the upgrades and steps to follow to resolve the mileage issue.
yes finally got this resolved with a couple of upgrades. However, a new issue appeared. When watching a movie or music via bluetooth, only the right side speakers work, not the left. I am waiting from the seller on a solution on this. If you want mail me and I can email you the upgrades and steps to follow to resolve the mileage issue.

I disasembled my dash there is what i found

connected the new harness


but the screen does not turn on. My NTG does not have fibre and i does have only one white connector in the big connecting block to the HU. Any ideas?
Last edited by MASTERkame; Jan 24, 2019 at 01:45 PM.
Also, one doesn't power on the screen using the button that used to switch on the OEM unit. Instead it switch on when you turn on the car main computer, either turning the key or using the engine on button (no need to turn on the engine, turn the key to the previous stage and don't put your foot on the brake pedal).
Yes there's only one factory AFAIK. All the AliExpress + Amazon + Ebay + Carlife + ChrisTheSwid +... are only resellers.
More explanation in the following post1 and post2 on page 28
Wonder if the pin-outs are the same, meaning if you upgrade from V2 to V3, can you only change the screen/head or do you have to do the entire harness too.





