front turn signal not working

first put the headlight on a furnace with 180 degree make sure you remove all 3 blots and all metallic pieces
after that disassemble the lights and replace the turn light
i had the same issue but on my w212 after that make sure that you assemble the headlight with high quality silicone without acid
this is the led signal
Trending Topics
Good news it that you should be able to pick up one used online or potentially even a new one at a discount - they are manufactured by Hella for Mercedes, so if you see a Hella branded one that is the same as OEM*
*potentially it will not say "Mercedes-Benz" inside the light.
Link: https://www.ebay.com/p/1583154267
The Best of Mercedes & AMG

Good news it that you should be able to pick up one used online or potentially even a new one at a discount - they are manufactured by Hella for Mercedes, so if you see a Hella branded one that is the same as OEM*
*potentially it will not say "Mercedes-Benz" inside the light.
Link: https://www.ebay.com/p/1583154267



Question for Konigstiger: which module would throw those error codes 2228700789 or 2189007306?

Question for Konigstiger: which module would throw those error codes 2228700789 or 2189007306?

- Remove the headlight assembly from the car (usually by opening the hood and unbolting a few screws).
- Disconnect the wiring and control module carefully.
- Replace the LED strip or the entire module inside the headlight. Some people even end up replacing the whole headlight if the LED strip isn’t sold separately.
- Reconnect everything and test before fully reassembling.

- Remove the headlight assembly from the car (usually by opening the hood and unbolting a few screws).
- Disconnect the wiring and control module carefully.
- Replace the LED strip or the entire module inside the headlight. Some people even end up replacing the whole headlight if the LED strip isn’t sold separately.
- Reconnect everything and test before fully reassembling.



