mhannaoui

Hi,

I am looking for a front bumper plastic retainer for a 2013 E350. I search for a long time to no avail. Any pointers to a link or a part number is very much appreciated. The red arrow on the image below is the retainer location.



Thanks.

konigstiger

Check with dealer parts for coupling part #.

mhannaoui

Thanks konigstiger for the suggestion, but I don't see the correct part in the kit. I added 3 close ups that might help.







Thanks.

rapidoxidation

I just looked at the identical part on my car. No part number printed on it, but I bet if you pull the rivet from the other headlight you can get an acceptably close match from your local auto parts store. Doesn't have to be a twist lock; I bet a center pin removeable rivet of the proper length and diameter will work just fine. Get two if you want symmetry.

mhannaoui

Thanks rapidoxidation for looking up the part on your car. I don't have a reference rivet to use to purchase a similar aftermarket one as both sides are missing. I had some body work couple years ago that required the bumper to be removed, so most likely they were not tightened up properly when reassembled. I may have to bite the bullet and get them from the dealer, assuming they are sold individually.

mhannaoui

Thanks konigstiger for posting the image that identified the part. At least now I know what to call it. I'll check with the dealer and report back.

mhannaoui

Got the part from the dealer. The part number is 000-998-14-95-64.
A picture of the part is attached.

rapidoxidation

If I may ask, how proud of that part were they? (how much $$?)

mhannaoui

Actually, I was the proud one for finding the part. It was $6.

konigstiger

Right there all along and I missed it...