E63S Wagon lots of codes- power supply and check engine light
If you see voltage below 12.3 V :
stop driving ASAP!
Find a safe place to park.
Your car needs a reboot now...
Stop the engine ignition (Exit car if convenient)
LOCK the car for it to enter low-power sleep mode...
10mn later resume traveling ✌️
Use headlights:ON to generate a fixed voltage
The car VIP modules on CAN-C got in a jam.
ECU picked up corrupted/missing data that it disliked.
Diagnosing this soft-crash with field tools was a tall challenge ✌️
MB introduced a bug in the BOSCH ECU:
The ECU controlling the alternator output on M276/8 has a potentially costly firmware issue.
Under common conditions the ECU erroneous control causes low voltage disfunctions, batteries and charging system failures.
The fix is a simple 5mn software contribution that I wish i could test...




14.4V is a nice working voltage. The variation between .3 and .6 is not significant. It's the battery sensor that measures precisely how well ECU maintains its voltage control under a 50Amps total load.
No problemo




Simply inspect the connectors or ask for job estimate not a bad idea... but after OP fixed!
-- 4 connectors of VVT solenoid actuators
-- 4 connectors Camshaft sensors
These parts routinely leak oil into the engine harness anyway.
Let's see how fast dealer gets it on the road.
🤞
Last edited by CaliBenzDriver; Apr 5, 2023 at 06:31 PM.
Simply inspect the connectors or ask for job estimate not a bad idea... but after OP fixed!
-- 4 connectors of VVT solenoid actuators
-- 4 connectors Camshaft sensors
These parts routinely leak oil into the engine harness anyway.
Let's see how fast dealer gets it on the road.
🤞
The Best of Mercedes & AMG




Have them inspect the VVT oil leak situation before it has a chance to flod your harness with engine oil. Replace cam sensors and install pigtails for security.
Last edited by CaliBenzDriver; Apr 7, 2023 at 11:25 PM.





