FOB battery
#2
Take your car to a shop (Walmart even) and ask them to test your battery. You may be surprised at what you find. Just because 'they work' doesn't mean they are as good as they should be.
#3
CaliBenzDriver suggestions worked for me.
The following 2 users liked this post by Andre Cateb:
pierrejoliat (08-01-2024),
Raj1471 (08-01-2024)
#4
MBWorld Fanatic!
Joined: Jan 2016
Posts: 2,430
Likes: 696
From: In the Shadow of the Tetons
2013 ML350 Bluetec
If you leave the fob in the car all the time, your fob and the car are constantly talking to each other and the fob battery will be used up in short order.
#5
MBWorld Fanatic!
Joined: Apr 2019
Posts: 6,192
Likes: 3,825
From: Silicon Valley
MY'14 W212 M276 3.5NA @60kMi
These keyfob battery can last a long time.
The issue is the KeylessGo module suffer from unreliable connections that keep the keyfob awake there by draining tinny coin cell.
Upgrade CR2025 to CR2032!
The following 3 users liked this post by CaliBenzDriver:
#7
Out Of Control!!
Joined: Dec 2019
Posts: 14,876
Likes: 2,869
From: Toronto, Canada
PFL205.064 with M276.823 (Oil pump solenoid defeated)
New batteries doesn't necessarily mean new, they can be well past their shelf life or they are counterfeit, don't buy from amazon, I had a few bad batches purchased over the years I just go to my local store and buy them there, never had problem with batteries running out a few months anymore. I use to buy SONY ones on amazon but even FBA (Fulfilled by Amazon) ones turns out to be fake.
Trending Topics
#9
MBWorld Fanatic!
Joined: Dec 2020
Posts: 2,206
Likes: 1,338
From: 122W, 37N
2016 E350 4Matic wagon, 2019 Ford Expedition 4x4
I get CR2032 and other speciality batteries in bulk from www.digikey.com ... they are always very fresh, major brands like Panasonic, Energizer.
A 2032 *just* fits in the 212 fob, and if you use one, don't try and go back to the 2026 it came with. the 2032 has almost twice the life, but is 3.2mm thick instead of 2.6mm like the 2026.
A 2032 *just* fits in the 212 fob, and if you use one, don't try and go back to the 2026 it came with. the 2032 has almost twice the life, but is 3.2mm thick instead of 2.6mm like the 2026.
#10
MBWorld Fanatic!
Joined: Apr 2006
Posts: 4,653
Likes: 1,759
From: Dallas-Ft.Worth,TX
2016 E350 Sport
The CR2032 does NOT fit properly in the fob, made for the CR2025.
You have to force the cover closed. And if it DOES close -- mine will not -- the cover will pop loose at the most inopportune time, getting lost. Imagine buying a new fob just because you've lost the cover on the old one?
My car is a 2016 with full Keyless Go...
You have to force the cover closed. And if it DOES close -- mine will not -- the cover will pop loose at the most inopportune time, getting lost. Imagine buying a new fob just because you've lost the cover on the old one?
My car is a 2016 with full Keyless Go...
Last edited by DFWdude; 08-01-2024 at 08:04 PM.
The following users liked this post:
pierrejoliat (08-01-2024)
#11
MBWorld Fanatic!
Joined: Dec 2020
Posts: 2,206
Likes: 1,338
From: 122W, 37N
2016 E350 4Matic wagon, 2019 Ford Expedition 4x4
Hmmm. I've used CR2032 in both of my W212 keyfobs. They were a little snug, but the cover went on. I do keep our fobs in protective covers, this would keep the cover from going AWOL if it was to pop off.
question, do early 212's use the same fob as late 212's?
question, do early 212's use the same fob as late 212's?
#12
MBWorld Fanatic!
Joined: May 2012
Posts: 1,991
Likes: 1,166
From: Pepper Pike Ohio
12 E350 4Matic 13 E350 4Matic AMG Sport
My 2012 without keyless entry?start will hold the 2032, but my 2013 with keyless entry will not, covers won't close, I need to use 2025's in those.
The following users liked this post:
CaliBenzDriver (08-01-2024)
#13
MBWorld Fanatic!
Joined: Jan 2016
Posts: 2,430
Likes: 696
From: In the Shadow of the Tetons
2013 ML350 Bluetec
Fenix. Excellent choice in lighting.
#14
MBWorld Fanatic!
Joined: Dec 2020
Posts: 2,206
Likes: 1,338
From: 122W, 37N
2016 E350 4Matic wagon, 2019 Ford Expedition 4x4