FTP** 3'' ALUMINUM BEAST TUBES**CLICK**
#1
Former Vendor of MBWorld
Thread Starter
![Thumbs up](https://mbworld.org/forums/images/icons/icon14.gif)
INTRODUCING FTP 3 inch Aluminum intakes or "Beast tubes" as some call them. These are Mandrel bent pipes to our specs, that are modified to fit the E55 Platform. These are not Pipes that can just be bought off the shelf and installed . we start with a straight 3'' section of T6061 Aircraft grade aluminum. Also both sides are DIFFERENT. Please look at the pictures and read the description, and features!!! We won't be stocking them for another couple weeks but the preliminary testing is complete and its off to the dyno for the results next week.
BUY NOW CLICK>>http://www.fabtech-performance.com/AMG_Performance.html
Features:
-3 inch 6061 Aircraft grade Aluminum mandrel bent intake tubes
-4 ply Silicone couplers
-3'' worm clamps
-Optional Powder coat or liquid paint in the color of your choice for an additional $$$
Benefits:
-100% bolt on and GO!!
-A true 3'' Inches of "Ram air velocity" (FACTORY TUBE NECKS DOWN TO 1.6 INCHES!!!! EEEKKK) Our system is a true 3'' tube!!
-Improved Air flow
-Our intake tubes don't neck down like the factory Plastic ones
-No cutting or drilling needed
-Mates up to the factory plastic scoops
Extras:
-Paint matched to your car add $100
-Black Heat wrap add $19.95
-Black high temp ceramic add $75.95
Pictures:
![](http://i88.photobucket.com/albums/k198/projectturboex/d1e110f7.jpg)
![](http://i88.photobucket.com/albums/k198/projectturboex/5a1d7a3a.jpg)
![](http://i88.photobucket.com/albums/k198/projectturboex/e2ea259a.jpg)
FACTORY PLASTIC INTAKE TUBE NECKS DOWN TO 1.6 INCHES!!
![](http://i88.photobucket.com/albums/k198/projectturboex/51e5de50.jpg)
OUR INTAKE TUBE IS A STRAIGHT 3'' OD
![](http://i88.photobucket.com/albums/k198/projectturboex/577323ab.jpg)
Thanks for looking at our Products![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
BUY NOW CLICK>>http://www.fabtech-performance.com/AMG_Performance.html
Features:
-3 inch 6061 Aircraft grade Aluminum mandrel bent intake tubes
-4 ply Silicone couplers
-3'' worm clamps
-Optional Powder coat or liquid paint in the color of your choice for an additional $$$
Benefits:
-100% bolt on and GO!!
-A true 3'' Inches of "Ram air velocity" (FACTORY TUBE NECKS DOWN TO 1.6 INCHES!!!! EEEKKK) Our system is a true 3'' tube!!
-Improved Air flow
-Our intake tubes don't neck down like the factory Plastic ones
-No cutting or drilling needed
-Mates up to the factory plastic scoops
Extras:
-Paint matched to your car add $100
-Black Heat wrap add $19.95
-Black high temp ceramic add $75.95
Pictures:
![](http://i88.photobucket.com/albums/k198/projectturboex/d1e110f7.jpg)
![](http://i88.photobucket.com/albums/k198/projectturboex/5a1d7a3a.jpg)
![](http://i88.photobucket.com/albums/k198/projectturboex/e2ea259a.jpg)
FACTORY PLASTIC INTAKE TUBE NECKS DOWN TO 1.6 INCHES!!
![](http://i88.photobucket.com/albums/k198/projectturboex/51e5de50.jpg)
OUR INTAKE TUBE IS A STRAIGHT 3'' OD
![](http://i88.photobucket.com/albums/k198/projectturboex/577323ab.jpg)
Thanks for looking at our Products
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#7
Trending Topics
#8
Former Vendor of MBWorld
Thread Starter
#12
Former Vendor of MBWorld
Thread Starter
No They will not. Sorry. If you would like to work something out please PM us ![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
The tubes were used on the dyno, Very hard to judge there was a small gain. But It could have been temp related etc. Ask the people that have them. They work well and give you a good S/c whine![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![thumbs](https://mbworld.org/forums/images/smilies/thumbsup.gif)
The tubes were used on the dyno, Very hard to judge there was a small gain. But It could have been temp related etc. Ask the people that have them. They work well and give you a good S/c whine
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
![bow](https://mbworld.org/forums/images/smilies/bowdown.gif)
#17
If you guys haven't read the recent news about Fabtech
There are a lot of unsatisfied customers, one big story should hit the airwaves any time now.
Start here....
http://www.**************.com/forum/...t=21495&page=1
There are a lot of unsatisfied customers, one big story should hit the airwaves any time now.
Start here....
http://www.**************.com/forum/...t=21495&page=1