Mark this thread as Unsold
Sharduls Modified Stock E55 Exhaust Manifolds $350 shipped.
#1
Super Member
Thread Starter
Join Date: Sep 2009
Location: Orlando FL
Posts: 935
Received 74 Likes
on
58 Posts
a unicorn tuned p30 e63
Sharduls Modified Stock E55 Exhaust Manifolds $350 shipped.
This is what shardul wrote on original post when he posted them. Only reason for selling is because i need to free up some money.
" I have has these on my car for a about a year now and yes they do produce about 15 to 20 rwhp over the stock setup. The stock bottle neck flange has been cut and the manifold is mated to 3” piping and 3” high flow cats. All the angles of the piping is like stock so nothing has to be removed while installing not even the steering linkage. Keep in mind all my O2 sensors are on and I don’t have and CEL with these manifolds. This may be a good mod for you California guys who have to do a visual inspection to pass smog. In terms of sound they are louder than the stock ones.
Manifolds will come in one piece until the black line in the picture number 4. Each side will have 2 holes one before and one after cats for the primary and secondary O2 sensors. These bungs are in the stock location so you don’t need to extend O2 harness etc etc. In addition to this the driver side has a bung and a nut for a wideband O2 sensor if you want to install one or use the port while dyno tuning.
https://mbworld.org/forums/engine-pe...manifolds.html here is the original post for pics.
Thanks
" I have has these on my car for a about a year now and yes they do produce about 15 to 20 rwhp over the stock setup. The stock bottle neck flange has been cut and the manifold is mated to 3” piping and 3” high flow cats. All the angles of the piping is like stock so nothing has to be removed while installing not even the steering linkage. Keep in mind all my O2 sensors are on and I don’t have and CEL with these manifolds. This may be a good mod for you California guys who have to do a visual inspection to pass smog. In terms of sound they are louder than the stock ones.
Manifolds will come in one piece until the black line in the picture number 4. Each side will have 2 holes one before and one after cats for the primary and secondary O2 sensors. These bungs are in the stock location so you don’t need to extend O2 harness etc etc. In addition to this the driver side has a bung and a nut for a wideband O2 sensor if you want to install one or use the port while dyno tuning.
https://mbworld.org/forums/engine-pe...manifolds.html here is the original post for pics.
Thanks
#5
Super Member
Join Date: Jan 2007
Posts: 780
Likes: 0
Received 0 Likes
on
0 Posts
09 335i 03 CLK55 AMG
Trending Topics
#16
MBWorld Fanatic!
Hi,
I would like to know if these will fit my (w208) clk430? If I need to modify them that is fine as well. I know it's a long shot however, I would love to get these on my car.
Thanks liran
I would like to know if these will fit my (w208) clk430? If I need to modify them that is fine as well. I know it's a long shot however, I would love to get these on my car.
Thanks liran
#19
Super Member
Thread Starter
Join Date: Sep 2009
Location: Orlando FL
Posts: 935
Received 74 Likes
on
58 Posts
a unicorn tuned p30 e63
AK, a couple people here and there but no one has sent any money yet haha. I dont have the time to put them no right now and i got some other things to do to the car so thats the only reason i havent done it yet.
#20
Newbie
Join Date: Nov 2011
Location: Katy,TX
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
04 E55, 10 Camaro SS
If I can gather the money I will take these thats for sure. Looks as though the supercharger clutch/pulley is squeaking more and more now. Most likely have to replace this first before the manifolds....that is all that is holding me back.