c55 cluster in g500 w463
02-25-2018, 10:47 AM
#1
Newbie
Thread Starter
c55 cluster in g500 w463
Hello Mbworld,
I am new to mbworld. I recently just purchased a w463 g500 and I will be doing tons of upgrades.
first upgrade I wanted to get to is the cluster. I have read on the net that, you can use the cluster from
the c class. do anyone know if this is possible??? if so how
thanks in advance
I am new to mbworld. I recently just purchased a w463 g500 and I will be doing tons of upgrades.
first upgrade I wanted to get to is the cluster. I have read on the net that, you can use the cluster from
the c class. do anyone know if this is possible??? if so how
thanks in advance
04-19-2019, 08:59 PM
#2
Junior Member
W203 cluster in w463
Hello Mbworld,
I am new to mbworld. I recently just purchased a w463 g500 and I will be doing tons of upgrades.
first upgrade I wanted to get to is the cluster. I have read on the net that, you can use the cluster from
the c class. do anyone know if this is possible??? if so how
thanks in advance
I am new to mbworld. I recently just purchased a w463 g500 and I will be doing tons of upgrades.
first upgrade I wanted to get to is the cluster. I have read on the net that, you can use the cluster from
the c class. do anyone know if this is possible??? if so how
thanks in advance
Hi, I just got a c55 cluster with Brabus guages. Programmed for me by my buddy in Russia. Got it shipped backed to me (recieved today) electronics, speedo, etc. all works. Now im fabricating it into the G500 cluster moulding piece. Will advise in a few hours. Wish me luck
The following users liked this post:
084runnerltd (05-17-2020)
04-20-2019, 08:30 PM
#4
Junior Member
I can confirm that a w203 cluster retrofitted into the g500 housing (a lot of cutting with dremel) will work. You basically just need to cut out the guage face. If you have someone to program the cluster for mileage, eprom etc. Total parts cost should be about a $150-200 plus labour for programming and then your time for doing the retro fit. I can post some pics later today if anyone is interested.
07-01-2019, 05:42 PM
#6
I can confirm that a w203 cluster retrofitted into the g500 housing (a lot of cutting with dremel) will work. You basically just need to cut out the guage face. If you have someone to program the cluster for mileage, eprom etc. Total parts cost should be about a $150-200 plus labour for programming and then your time for doing the retro fit. I can post some pics later today if anyone is interested.
I am about to do the same to mine right now , wish me luck! How did you put it back together after cutting, Epoxy?
Trending Topics
12-26-2019, 05:43 PM
#9
01-28-2020, 05:27 PM
#10
Last edited by lukasqos; 01-28-2020 at 05:29 PM.
09-02-2020, 07:57 PM
#12
Guage swap
I can confirm that a w203 cluster retrofitted into the g500 housing (a lot of cutting with dremel) will work. You basically just need to cut out the guage face. If you have someone to program the cluster for mileage, eprom etc. Total parts cost should be about a $150-200 plus labour for programming and then your time for doing the retro fit. I can post some pics later today if anyone is interested.
What year c class works with what year g class?
11-23-2020, 04:17 AM
#13
Newbie
Join Date: Nov 2020
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
G600
Fuel guage fix
