2013 G63 mirror tap for radar hardwire?
Hope everyone is well. I found this good thread with instructions on radar hardwire (DIY 2020 G63 Radar/Dashcam Hardwire - MBWorld.org Forums) however, the gentleman ran a wire all the way down to fusebox. I prefer to tap into the power mirror box as I am now accomstomed to doing on all vehicles.
Does anyone know which wires in the mirror/sensor box to tap for power and ground in a 2013 G63? I typically use a kit like this:
Thanks much.
I found two 3-wire clusters behind the plastic trim on the windshield itself. Both have a 12V power and ground, but both seem to be constant 12V - radar detector powers on but never powers off even when car is turned off, locked and I walk away for 5 mins or so.
ugh.
Anyone know how to remove the overhead console trim - that houses the switchgear for sunroof, dome lights etc. ? Mine is the third picture below. I tried different corners with a trim tool but it seems to be tightly held on and I didn't want to force it and break tabs. I can see if there are any switched 12V lines in there.
Last edited by xxaarraa; Oct 31, 2023 at 09:22 AM.
Trending Topics
The Best of Mercedes & AMG
I will call them and look into it. In the meantime, I have the radar detector plugged into the constant 12V line, but have a battery saving option turned on the detector unit itself where it powers down after a while.








My guess is most G owners don't really drive these rigs that fast.
