Matte Black G63 on ADV1 Wheels - All Terrains
My thanks to the folks at ADV1 for the help and to www.andrewgoodmanstudios.com for the very well done pictures. I'll post a few here for your feedback.
More pictures at https://www.facebook.com/ADV.1fanpage
Last edited by clktoc63; Nov 21, 2013 at 07:12 AM.
They are 20x10 ADV6mv2 wheels. We went with 20x10's on all four corners. Given the all terrain tire, I was surprised how little the ride actually changed and it's getting tons of compliments on its tougher look.
Granted I have never tried to push this truck through the corners and never intend to try to find the speed limiter...intentionally.
According to my research, the stock tire diameter is 30.9, the Nitto Terra Grappler I put on is a 305/50r20 and measures 32.09, so only about an inch difference. I haven't noticed a difference on the speedo.
I'm guessing that this 305/50r20 would not fit on the stockers without rubbing, but it looks like they may have a 265, 275 and perhaps the 285 that might work. I think the stock tire width is 11.2", so anything at or under that should theoretically fit. I do not know how much wiggle-room there is after 11.2.
Here's the links to the tire as requested: http://www.nittotire.com/tire/terragrappler#size
Trending Topics
The Best of Mercedes & AMG
It could be an eventuality though...
There is no rubbing with this set-up. It seems ADV1 does a good job with the offsets. They have the secret sauce.
Road noise is surprisingly non-existent. I was shocked how quiet it was and still hardly believe it. The ESC doesn't seem to interfere and I admittedly don't use cruise control, but I would expect that to impact it. I hadn't thought of that.
A fifth wheel/tire on back would look great, that thought never even crossed my mind. I'll have to start saving!
. David from Fabspeed is taking care of the order. He said hi...
Sounds great, please post some pics of the set-up once you have it. I look forward to checking it out. Are you going with a Nitto Terra Grappler or something else?
Per the other question about the chrome brush guard, I had planned to paint or wrap it, but I went with the exposed hardware on the wheels and although I don't particularly care for chrome it ties in nice with the wheels.
. Got a question, did you do wheel alignment after installing the wheel tire combo on your G?
Answering questions, the handling difference is hardly noticeable, but I didn't have much seat time before the switch.
I considering altering the bull bar to black, but I ended up with chrome lug bolts (not by choice, as I wanted black) and purchased plastic covers for them. Ironically, because the wheels have the exposed stainless hardware, the chrome lug bolts actually looked right. Then with the chrome lugs and stainless wheel hardware, the chrome bull bar didn't look too bad and it all seems to fit together.
No spacers were needed, the kind folks at ADV1 had the wheels spec'd perfectly. The big issue for me was the 3 week long search for lug bolts and even then I couldn't find black and had to get the chrome, which just happened to accidentally work out.
My thanks to the folks at ADV1 for the help and to www.andrewgoodmanstudios.com for the very well done pictures. I'll post a few here for your feedback.
More pictures at https://www.facebook.com/ADV.1fanpage




