2015 GL 450 humming bearing noise
#1
2015 GL 450 humming bearing noise
So I have a humming noise coming from the rear that I assume is wheel bearings. Has anyone had bearing issues on there x164 ? I am at 128k miles. The noise has been present for at least 10k miles and does not seem to be getting worse. Possibly rear diff bearings ?
many advice is helpful here.
many advice is helpful here.
#3
#5
#6
#7
Trending Topics
#8
Bearing replaced
Hi
Yes i had the problem and i replaced it by myself. I got ABS and ESC light on dash.
My scenner gave me a code for fault speed sensor and check the bering weel warning.
The cost was a 120 bucks and about 3 hours of work.You need to rent the Bearing pressing toolkit and buy balljoint seporator.
There are a lot of shops they have a press as well.
i orderd the National bearing from Auto Parts .Replaced, sensor working properly no annoying noise anymore no ligts on dash.
if you are familiar with some of mechanical work it shouldn't be a problem at all.
Sasa
Yes i had the problem and i replaced it by myself. I got ABS and ESC light on dash.
My scenner gave me a code for fault speed sensor and check the bering weel warning.
The cost was a 120 bucks and about 3 hours of work.You need to rent the Bearing pressing toolkit and buy balljoint seporator.
There are a lot of shops they have a press as well.
i orderd the National bearing from Auto Parts .Replaced, sensor working properly no annoying noise anymore no ligts on dash.
if you are familiar with some of mechanical work it shouldn't be a problem at all.
Sasa
Last edited by SKGL450; 04-09-2020 at 09:24 PM.
#9
Hi
Yes i had the problem and i replaced it by myself. I got ABS and ESC ligt on dash.
My scenner gived me code for fault speed sensor and check the bering weel warning.
The cost was a 120 bucks and about 3 hours of work.You need to rent the Bearing pressing toolkit and buy balljoint seporator.
There are a lot of shops they have a press as well.
i orderd the National bearing from Auto Parts .Replaced, sensor working properly no annoying noise anymore no ligts on dash.
if you are familiar with some of mechanical work it shouldn't be a problem at all.
Sasa
Yes i had the problem and i replaced it by myself. I got ABS and ESC ligt on dash.
My scenner gived me code for fault speed sensor and check the bering weel warning.
The cost was a 120 bucks and about 3 hours of work.You need to rent the Bearing pressing toolkit and buy balljoint seporator.
There are a lot of shops they have a press as well.
i orderd the National bearing from Auto Parts .Replaced, sensor working properly no annoying noise anymore no ligts on dash.
if you are familiar with some of mechanical work it shouldn't be a problem at all.
Sasa
#11
I have the same problem with my 2011 GL550, a humming noise coming from the rear.....I think its the right rear, but not 100%. I too am thinking its a bearing going out. I am going to check my rear diff fluid first, but pretty sure it makes sense I need new bearings. I tow an 8000 lbs boat and I run spacers, so sure its a bearing.
#12
I have the same problem with my 2011 GL550, a humming noise coming from the rear.....I think its the right rear, but not 100%. I too am thinking its a bearing going out. I am going to check my rear diff fluid first, but pretty sure it makes sense I need new bearings. I tow an 8000 lbs boat and I run spacers, so sure its a bearing.