Anyone have Wheel Speed Sensor issues ??
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 60
Likes: 0
01 E320
Anyone have Wheel Speed Sensor issues ??
Anyone have Wheel Speed Sensor issues ?? i just got this car and it had 2 Wheel speed Sensors not working and would get Limp mode because of it..or lots of Lights on dash about ABS ...but now that i changed them ,.i get a sudden jerk of the Transmission out of no where and alot of abs lights on the dash and will go away in 5 seconds....anyone have this Experience ????
Senior Member
Joined: Oct 2015
Posts: 287
Likes: 24
From: New York
2012 GL350
You might want to have it read to see which wheel speed sensor is the problem. Maybe you got a bad sensor or bad connection.
You may also see you have a code regarding the conductor plate, this would cause what you are experiencing as well.
You may also see you have a code regarding the conductor plate, this would cause what you are experiencing as well.
MBWorld Fanatic!
Joined: Jan 2010
Posts: 3,115
Likes: 782
NGL450 w/EORP, S550
Yes…they’ll go bad, sometimes when the battery is dying and you put a new one in.
replace in pairs front and back with genuine Mb parts and all that weirdness will go away.
do not drive until you’ve fixed this.
replace in pairs front and back with genuine Mb parts and all that weirdness will go away.
do not drive until you’ve fixed this.
Member
Joined: Oct 2016
Posts: 198
Likes: 25
2005 Mercedes C230 Kompressor, 2008 GL 320 CDI, 2008 ML320 CDI, 2016 GLE 300d AMG Night Package
Anyone have Wheel Speed Sensor issues ?? i just got this car and it had 2 Wheel speed Sensors not working and would get Limp mode because of it..or lots of Lights on dash about ABS ...but now that i changed them ,.i get a sudden jerk of the Transmission out of no where and alot of abs lights on the dash and will go away in 5 seconds....anyone have this Experience ????
Trending Topics
MB World Stories
The Best of Mercedes & AMG
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
5 Underrated Mercedes-Benz Models That Don't Get the Love They Deserve
Verdad Gallardo
Mercedes 300D Has Pushed Well Past 1 Million Miles and It Ain't Stopping
Verdad Gallardo
10 Most Reliable Mercedes-Benz Models You Can Buy Used
Verdad Gallardo
MBWorld Fanatic!
Joined: Aug 2003
Posts: 8,882
Likes: 1,212
From: In my garage
E55, GLS450, GL63, GLE350
This. If you don't use MB speed sensors, you will end up replacing them much more often. Ask me how I know.
Thread Starter
Junior Member
Joined: Mar 2011
Posts: 60
Likes: 0
01 E320
oh ok,..so i should get the Legit out of Mb ? if thats the case i think theyre using the Bremi brand or does it Say just Mercedes ? i heard they use an adapter bracket,.is that true ? ..
also Blown v8 did dis happend to you too ? what were the Symptoms ?
MBWorld Fanatic!
Joined: Aug 2003
Posts: 8,882
Likes: 1,212
From: In my garage
E55, GLS450, GL63, GLE350
You can buy the MB parts online but make sure they are MB OEM and not some replacement "equivalent" OEM. The symptoms are more frequent sensor changes. The aftermarket ones fit without an adapter but the quality/tolerance or whatever it is really makes a difference. Changing the sensors is not a big deal but when they fail it can cause some real safety issues since it disables the traction control and abs.
Senior Member
Joined: Oct 2015
Posts: 397
Likes: 23
From: Queensalnd Australia
2006 ML320 CDI (2 of) and 2008 GL320
I have had a few sensor issues - one had the typical replace wheel sensor and check wheel bearings etc - it was a weekend and only had the car til Sunday (daughters car) so I actually just cleaned the sensor ring area on the hub (through the sensor hole and rotated hub) with a very small wire brush - fair bit of corrosion etc (as expected) - blew it out with compressor and put back togethor
Took car for a quick run and still had error so was thinking about getting a new sensor when fired the car up again and it cleared - has not had problem again.
Another car was engaging the traction even just going slowly around yard - the live data showed that wheel doing about 140kph when other wheels only doing 5kph (true speed) - it was first time I ever had an ABS sensor not just stop reading.
Took car for a quick run and still had error so was thinking about getting a new sensor when fired the car up again and it cleared - has not had problem again.
Another car was engaging the traction even just going slowly around yard - the live data showed that wheel doing about 140kph when other wheels only doing 5kph (true speed) - it was first time I ever had an ABS sensor not just stop reading.
Newbie
Joined: Mar 2025
Posts: 3
Likes: 0
So was it possible that these sensor gone bad or damaged because of a bad battery? If so, that’s is nuts.
My 2015 GL450 never gave me a battery warning.
Is it possible to reset the codes after replacing the battery and hope ABS sensors are still good?
MBWorld Fanatic!
Joined: Jan 2010
Posts: 3,115
Likes: 782
NGL450 w/EORP, S550
It’s pretty similar in the sense that the wheel speed sensors usually fail after a low voltage event when a new battery is put into the system.
for example, car sat for a couple of years and ran fine until the battery quit - put in a new battery and all of the sudden you have ESP caution and the ABS is self-actuating at low speeds, and the steering feels very heavy. Change one sensor and it’ll be fine for a couple of days, until the other one on the axle burns out.
If you put cheap sensors in it happens all the time.
for example, car sat for a couple of years and ran fine until the battery quit - put in a new battery and all of the sudden you have ESP caution and the ABS is self-actuating at low speeds, and the steering feels very heavy. Change one sensor and it’ll be fine for a couple of days, until the other one on the axle burns out.
If you put cheap sensors in it happens all the time.
