When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2020 GLC300 4Matic. US model. ~78,889 miles. Purchased new from a Mercedes dealer. Sole owner.
Hey everyone — quick question.
My check engine light just came on out of nowhere. The car was running perfectly fine before this, and I just had routine maintenance done by my independent mechanic. Edit: a new MB battery was replaced. not sure if that matters.
Now the car won’t accelerate properly. It moves, but feels sluggish and kind of jerky, almost like the transmission is hunting or shifting back and forth. I’ve restarted it a couple of times with no change.
I also tried tightening the gas cap and switching between Sport, Eco, and Comfort modes, but nothing made a difference.
Any ideas what this could be?
(and also, do you think the mechanic could’ve messed around with the computer to cause this so I can come back and spend more money I hate to think that, but anything today is possible)
Last edited by 2020GLC4Matic; May 10, 2026 at 01:56 PM.
2020 GLC300 4Matic. US model. ~78,889 miles. Purchased new from a Mercedes dealer. Sole owner.
Hey everyone — quick question.
My check engine light just came on out of nowhere. The car was running perfectly fine before this, and I just had routine maintenance done by my independent mechanic.
Now the car won’t accelerate properly. It moves, but feels sluggish and kind of jerky, almost like the transmission is hunting or shifting back and forth. I’ve restarted it a couple of times with no change. You should bring the car right back to the mechanic since clearly they messed up something.
I also tried tightening the gas cap and switching between Sport, Eco, and Comfort modes, but nothing made a difference.
Any ideas what this could be?
(and also, do you think the mechanic could’ve messed around with the computer to cause this so I can come back and spend more money I hate to think that, but anything today is possible) https://cimg6.ibsrv.net/gimg/www.mbw...bd90174d0.jpeg
At least it is not flashing? If not flashing, you will need a scanner to see what it is it about since CEL can mean so many things. Especially that you are experiencing all those symptoms might not be a good idea to continue driving. Flashing means to not drive at all.
Last edited by W205C43PFL; May 10, 2026 at 01:30 PM.
At least it is not flashing? If not flashing, you will need a scanner to see what it is it about since CEL can mean so many things. Especially that you are experiencing all those symptoms might not be a good idea to continue driving. Flashing means to not drive at all.
thanks for the important aspect. I did bring the car back home and switched out to another. I’ll take it to the mechanic tomorrow. Thanks!
My independent mechanic ‘fuel rail pressure sensor’ that was the code, but he sent me back to Mercedes dealership. because he says there is an extended warranty and it has to do with fuel system and he says they’ll probably cover it so that’s where I’m at, but can anybody share more information on fuel rail, pressure sensor? I’m not a mechanic at all.
My independent mechanic ‘fuel rail pressure sensor’ that was the code, but he sent me back to Mercedes dealership. because he says there is an extended warranty and it has to do with fuel system and he says they’ll probably cover it so that’s where I’m at, but can anybody share more information on fuel rail, pressure sensor? I’m not a mechanic at all.
I find it rather interesting this happened right after your mechanic did work on the vehicle, are they just trying to evade responsibility?
Dealer repair/resolution: 78902 100 CONNECT BATTERY CHARGER , PERFORMED SDS TEST --CODE---> P019185 The rail pressure sensor has a malfunction. There is a signal above the permissible limit value , PERFORMED SOFTWARE UPDATE FOR M.E CONTROL UNIT AS PER FAULT CODE.
Is this something I could have done, a software update screws up my whole weekend and Monday morning. Good grief! And it was $326, which for me, is not that bad but it’s MB failure, not
mine.... !
Last edited by 2020GLC4Matic; May 11, 2026 at 09:19 PM.
Dealer repair/resolution: 78902 100 CONNECT BATTERY CHARGER , PERFORMED SDS TEST --CODE---> P019185 The rail pressure sensor has a malfunction. There is a signal above the permissible limit value , PERFORMED SOFTWARE UPDATE FOR M.E CONTROL UNIT AS PER FAULT CODE.
Is this something I could have done, a software update screws up my whole weekend and Monday morning. Good grief! And it was $326, which for me, is not that bad but it’s MB failure, not
mine.... !
OP, I am glad it was super easy fix. To answer your question, this type of software update requires using XENTRY which only those who have it, for example in this case a dealership will be able to perform. Glad it is resolved now.
Thanks @chrisbrown and @W205C43PFL . And what are your thoughts about paying for it, the more I think about it I say "no." I am calling the service manager and I think I have a right to question the charge. A manufacturer-required software update is often not something the owner should be paying for. The update falls under:
Recall (safety or emissions-related) which is 100% free by law.
Service campaign / goodwill update from the manufacturer. Q: is this a known issue and what details can I share back with the dealer?
Thanks @chrisbrown and @W205C43PFL . And what are your thoughts about paying for it, the more I think about it I say "no." I am calling the service manager and I think I have a right to question the charge. A manufacturer-required software update is often not something the owner should be paying for. The update falls under:
Recall (safety or emissions-related) which is 100% free by law.
Service campaign / goodwill update from the manufacturer. Q: is this a known issue and what details can I share back with the dealer?
Warranty-covered issue (extended warranty),
Any other thoughts on this?
Yes, you should ask why you were charged.
It sounds unusual to me, but did you ask for additional diagnostics while you were there?
You need to find out the reason for the charge, then you can decide to dispute it if you wish to do so.
Yes, you should ask why you were charged.
It sounds unusual to me, but did you ask for additional diagnostics while you were there?
You need to find out the reason for the charge, then you can decide to dispute it if you wish to do so.
Agree especially if OP have warranty, warranty should cover the diagnostic charge as well.
Thanks @chrisbrown and @W205C43PFL . And what are your thoughts about paying for it, the more I think about it I say "no." I am calling the service manager and I think I have a right to question the charge. A manufacturer-required software update is often not something the owner should be paying for. The update falls under:
Recall (safety or emissions-related) which is 100% free by law.
Service campaign / goodwill update from the manufacturer. Q: is this a known issue and what details can I share back with the dealer?
Warranty-covered issue (extended warranty),
Any other thoughts on this?
Replied above : ) hope they give you a proper work order.
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Slideshow: A one-of-one U.S.-spec Mercedes-Benz SLR McLaren Roadster became even rarer after a factory-backed transformation at McLaren's headquarters.
