Parting out a 1999 ML320 Black Exterior and Gray Interior
04-22-2012, 04:49 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
Parting out a 1999 ML320 Black Exterior and Gray Interior
After sitting for a while with no use at all I have decided to part out my 1999 ML320. I truly loved this car as it was a lot of fun to drive and it helped me a TON when I needed a realiable all wheel drive during the mean Boston winters while in college.
Other this being a bit banged up (my fiancee drove it when I got my Cayenne) it worked flawlessly before getting shelved. I have sold quite a few parts on eBay and on other forums but there are a ton still left.
The exterior is Black and the Interior is Gray. It has W164 rims on now but I would like to hold off on selling them until I am about ready to haul off because the factory rims and tires are in our place in Massachusetts and I have no plans on bringing them here to Maryland.
I will send a PM with total cost and if you agree all I would need is your paypal email address so I could send you an invoice (for your records and mine).
Thanks for looking and no request is too obscure so feel free to ask as descriptive a request as possible if you do not have part numbers.
Other this being a bit banged up (my fiancee drove it when I got my Cayenne) it worked flawlessly before getting shelved. I have sold quite a few parts on eBay and on other forums but there are a ton still left.
The exterior is Black and the Interior is Gray. It has W164 rims on now but I would like to hold off on selling them until I am about ready to haul off because the factory rims and tires are in our place in Massachusetts and I have no plans on bringing them here to Maryland.
I will send a PM with total cost and if you agree all I would need is your paypal email address so I could send you an invoice (for your records and mine).
Thanks for looking and no request is too obscure so feel free to ask as descriptive a request as possible if you do not have part numbers.
05-02-2012, 09:51 AM
#2
Newbie
Join Date: Apr 2012
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
2001 ML430
After sitting for a while with no use at all I have decided to part out my 1999 ML320. I truly loved this car as it was a lot of fun to drive and it helped me a TON when I needed a realiable all wheel drive during the mean Boston winters while in college.
Other this being a bit banged up (my fiancee drove it when I got my Cayenne) it worked flawlessly before getting shelved. I have sold quite a few parts on eBay and on other forums but there are a ton still left.
The exterior is Black and the Interior is Gray. It has W164 rims on now but I would like to hold off on selling them until I am about ready to haul off because the factory rims and tires are in our place in Massachusetts and I have no plans on bringing them here to Maryland.
I will send a PM with total cost and if you agree all I would need is your paypal email address so I could send you an invoice (for your records and mine).
Thanks for looking and no request is too obscure so feel free to ask asdescriptive a request as possible if you do not have part numbers.
Other this being a bit banged up (my fiancee drove it when I got my Cayenne) it worked flawlessly before getting shelved. I have sold quite a few parts on eBay and on other forums but there are a ton still left.
The exterior is Black and the Interior is Gray. It has W164 rims on now but I would like to hold off on selling them until I am about ready to haul off because the factory rims and tires are in our place in Massachusetts and I have no plans on bringing them here to Maryland.
I will send a PM with total cost and if you agree all I would need is your paypal email address so I could send you an invoice (for your records and mine).
Thanks for looking and no request is too obscure so feel free to ask asdescriptive a request as possible if you do not have part numbers.
05-02-2012, 11:52 AM
#3
MBWorld Fanatic!
Is your car equipped with OEM running boards?
The ones I'm talking about look like this: http://www.benzworld.org/forums/w163...ng-boards.html
I specifically need the rear plastic cap for both sides. Please let me know.
The ones I'm talking about look like this: http://www.benzworld.org/forums/w163...ng-boards.html
I specifically need the rear plastic cap for both sides. Please let me know.
05-02-2012, 12:46 PM
#4
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
Is your car equipped with OEM running boards?
The ones I'm talking about look like this: http://www.benzworld.org/forums/w163...ng-boards.html
I specifically need the rear plastic cap for both sides. Please let me know.
The ones I'm talking about look like this: http://www.benzworld.org/forums/w163...ng-boards.html
I specifically need the rear plastic cap for both sides. Please let me know.
05-02-2012, 12:48 PM
#5
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
05-02-2012, 12:50 PM
#6
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
Wait, are you talking about interior or exterior. The D-Pillar exterior are the part that most driver have which are faded or discolored. If that is what you are referring to, please let me know. Mine are in perfect condition.
05-02-2012, 11:21 PM
#7
MBWorld Fanatic!
I remember another part I want. Do you have the second row plastic trim piece for the passenger side? It's the plastic trim piece near the floor that is behind the seat adjuster (for folding the seat to the floor and moving it forward and backward). When you open the passenger rear door and look below the seat cushion, that's the part I want. (A lever is directly in front of it)
Thanks.
Thanks.
Trending Topics
05-05-2012, 07:53 PM
#8
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
I remember another part I want. Do you have the second row plastic trim piece for the passenger side? It's the plastic trim piece near the floor that is behind the seat adjuster (for folding the seat to the floor and moving it forward and backward). When you open the passenger rear door and look below the seat cushion, that's the part I want. (A lever is directly in front of it)
Thanks.
Thanks.
06-29-2012, 01:59 PM
#13
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
07-02-2012, 07:10 AM
#14
Member
Join Date: Jun 2009
Location: Jakarta - Indonesia
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
W210 - V6'02 / W163 - V6'02
hi,
do you have
1. the plastic seat cover which is on the side of front right seat (without the seat adjuster). pls see picture
[IMG]
[/IMG]
2. dead pedal or foot rest (the 2nd from left)
[IMG]
[/IMG]
3. exterior shiny plastic pilar cover above rear lamp
[IMG]
[/IMG]
thanks
do you have
1. the plastic seat cover which is on the side of front right seat (without the seat adjuster). pls see picture
[IMG]
[/IMG]2. dead pedal or foot rest (the 2nd from left)
[IMG]
[/IMG]3. exterior shiny plastic pilar cover above rear lamp
[IMG]
[/IMG]thanks
07-02-2012, 07:54 AM
#15
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
07-02-2012, 07:58 AM
#16
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
hi,
do you have
1. the plastic seat cover which is on the side of front right seat (without the seat adjuster). pls see picture
[IMG][/IMG]
2. dead pedal or foot rest (the 2nd from left)
[IMG][/IMG]
3. exterior shiny plastic pilar cover above rear lamp
[IMG][/IMG]
thanks
do you have
1. the plastic seat cover which is on the side of front right seat (without the seat adjuster). pls see picture
[IMG]
[/IMG]2. dead pedal or foot rest (the 2nd from left)
[IMG]
[/IMG]3. exterior shiny plastic pilar cover above rear lamp
[IMG]
[/IMG]thanks
07-11-2012, 06:35 PM
#18
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
07-12-2012, 07:22 PM
#19
Newbie
Join Date: Jul 2012
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
ML320
Driver's Side View Mirror Housing
I need the driver's-side plastic assembly (front and back) only. My mirror and motor inner workings are intact. Do you have these pieces available, If so, what's your price?
Thanks
Thanks
07-13-2012, 10:18 PM
#21
Newbie
Join Date: Apr 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
2001 ML320
Do you have the passenger side mirror assembly as well? Just the back (mirror facing) side? Thanks.
07-16-2012, 10:35 PM
#22
Newbie
Join Date: Jul 2012
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
ML320
07-24-2012, 01:19 PM
#25
Junior Member
Thread Starter
Join Date: Mar 2005
Location: Silver Spring, MD
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
ML320 (Dead), ML55 (Sold), E500 (Sold), Cayenne S (Sold), E550 (Sold), Cayenne TurboS, GL550, GLC300
Both mirrors are gone sorry and I do apologize about the slow response. I forgot to subscribe to the thread.
