Fault code after oil cooler rebuild
#1
Fault code after oil cooler rebuild
Need some help if possible , just repaired my oil cooler seals . The car ticks over fine but I have a fault code P0193 and it seems to be in limp mode when I drive it . I am going to pull all the plugs and refit them any thing else I should look for . The vehicle was running fine before I took it apart .Any advise would be greatly appreciated .
The following users liked this post:
BlackML550 (09-25-2020)
#3
Fault
Need some help if possible , just repaired my oil cooler seals . The car ticks over fine but I have a fault code P0193 and it seems to be in limp mode when I drive it . I am going to pull all the plugs and refit them any thing else I should look for . The vehicle was running fine before I took it apart .Any advise would be greatly appreciated .
#6
#7
MBWorld Fanatic!
Joined: Oct 2011
Posts: 7,107
Likes: 754
From: Bronx, N.Y.
2002 ML 320 & 2006 ML500
Below is the correct code # for your problem. Read the highlighted section and decide what your next step will be.
The following users liked this post:
E55Greasemonkey (09-27-2020)