When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
As most of you know, we're here to provide any assistance you might need in upgrading your Mercedes with the latest in aftermarket lighting from LEDs to HIDs. All of our products can be found and purchased on our website www.aznoptics.com! Our units are CANBUS compatible so error free! Plug and Play solution
AZN Optics are official distributors for Morimoto HID components. We've just upgraded our HID line with new XB35 HID conversion kits ($150/kit):
Already have OEM Xenons? We have replacement Morimoto D1S and D2S bulbs as well so you can upgrade to pure white 5000K and sportier white with a slight bluish hue 6000K.
We also have 194 wedge LED bulbs ($19/set) featuring our latest V5 technology paired with COB diodes and constant current IC drives to help protect and extend the life of the unit:
Festoon LEDs ($20/set) can also be had in a range of sizes (31mm, 36mm, 38mm, 39mm, 41mm) also uses our constant current IC drive:
Not sure what you need? No problem. Just shoot us a PM or email us at aznoptics@gmail.com and we'll be more than happy to assist you. Forum special bulk package discounts can be had as well!
Have halogen reflectors and don't want to blind oncoming traffic with an HID conversion? Good call! We also carry full line of Morimoto Bi-Xenon projector retrofit kits from FX-R stage III and IV to Morimoto Mini Stage III!
I meant to keep alternator and charging system voltage down?That is more brightness,with less voltage>
replacing your halogen bulbs with lower power LEDs and replacing your front 55w headlamps with lower power 35w headlamps. We can help you out with that.
I want to run LEDs on my C300, but know next to nothing about what I'm buying. Definitely going to need some help to make sure I buy the right stuff and have everything I need when it's time to install.
That being said, am I correct in saying the higher the #K the higher the brightness? What are some specific products I should consider?
Come join us at Mercedes Benz EXKLUSIV, an all Mercedes event - Sat. Sept. 9 2017. Long Beach, CA between 10am to 2pm. We will be having on site discounts throughout the event.
By user request, we're working on a new product for those with painted sidemarkers and don't want any lights showing but also no error codes. This will be a circuit board design straight plug in replacement with no actual LED light source. We are in user testing right now, but hope to have it available sometime in Aug.
08-24-2015, 06:55 PM
