key not turning in ignition
Cant even get ignition on to plug a diagonastic in to see what the problem is?
Can anyone help
Sounds like DAS isn't recognising your key. That can be caused by many things; low voltage being one of the most common.
Can you test the batt voltage with a multimeter?
Perhaps its a mechanical issue.....Try using two fingers to tighten the beauty ring around the ignition where the key is inserted.
Trending Topics
Or is your problem diferent?
The Best of Mercedes & AMG
After the key is inserted then I am able with no problem to turn it all the way to the position that should start the engine. Battery is fully charged, I can play radio, open or close the car with central lock. Everything is functional; this is where I have suspected Faulty Crank Position Sensor. After replacing the sensor problem has not been solved, engine will still not engage, car will not start. When I was replacing crank position sensor, I have observed interesting think, that the old sensor was covered with oil; is that normal? Or something else is happening here. Now, I would like to replace spark plugs, and perhaps some of relays that are responsible startup system in my car, can you please advice how to proceed? i don’t have the diagnostic scan tool available however, I don’t think it will help much since the car engine is not running, or maybe I am wrong. All this happen gradually, sometimes car would not start and then would engage with no problem. Two days ago, I came back home and since then I am dealing with the problem.
After the key is inserted then I am able with no problem to turn it all the way to the position that should start the engine. Battery is fully charged, I can play radio, open or close the car with central lock. Everything is functional; this is where I have suspected Faulty Crank Position Sensor. After replacing the sensor problem has not been solved, engine will still not engage, car will not start. When I was replacing crank position sensor, I have observed interesting think, that the old sensor was covered with oil; is that normal? Or something else is happening here. Now, I would like to replace spark plugs, and perhaps some of relays that are responsible startup system in my car, can you please advice how to proceed? i don’t have the diagnostic scan tool available however, I don’t think it will help much since the car engine is not running, or maybe I am wrong. All this happen gradually, sometimes car would not start and then would engage with no problem. Two days ago, I came back home and since then I am dealing with the problem.
Spark plugs are not going to cause a no crank issue so forget about them.







