What is a "Drive Cycle" How many starts/stops, and miles?
I believe the car must be driven 100 miles (+/-). Is this true, and are there a certain number of engine starts required before the code memory clears?
(My state emmission inspection will not pass if there are any codes in memory, even if the problem has been corrected.)
http://www.peachparts.com/shopforum/...78&postcount=2
There are lots of opinions on what's required. I have read that a single drive cycle including starting the engine, driving until the coolant temp reaches >70 degrees C and then turning off the engine is adequate.
To be sure since I didn't want to have to make a third trip. I drove the car for 2 days making approximately 3 individual trips per day reaching operating temp each time. Total distance was 60 mi. That worked although I'm sure something less might have been okay too.
Start engine let it idle for 2.5 min
2 light acceleration to 35kmph
2 medium acceleration 45 kmph
2 hard acceleration to 55 kmph
5 min at 100kmph
5 min at 90 kmph
return to shop and let idle for 10 min
Please note you want your tank between a quarter and three quarter.
Trending Topics
The Best of Mercedes & AMG




