22x10's - Is 285/35/22 ET50 correct?
The vendor claims it's a perfect fitment but everything I've found online and through these forums has various tire sizes.
Any thoughts or suggestions would be greatly appreciated
The vendor claims it's a perfect fitment but everything I've found online and through these forums has various tire sizes.
Any thoughts or suggestions would be greatly appreciated

Your speedo will be out, and the wheels will SIT IN more than your factory ones. [assuming you are currently running the factory 21s]
Our cars need +40 offset AT A MINIMUM- IMO. I did +35 on mine, and i think even that, i could have gone to +30 to beef it up a little more.
But as for tyre size, you need 295/30/22. That is the closest rolling diameter to the factory 21's. Its under 1% difference. So the speedo will be the same.
See this link:
https://mbworld.org/forums/ml55-amg-...s-22-pics.html
But, they do have a similar wheel in Matte Black with a +35 offset for more money:
http://www.stgeorgetyres.com.au/pack...ct-detail.aspx
Correct they were +50 offset, but i used 15mm spacers. But not normal spacers, these ones where pressed into the wheel, so they are part of the rim.
I was orignally concerned the setup wouldn't be the correct size/fit/offset for an 08 ML63 versus what I've seen on a 2012+. I was assured by HRE and Wheels Boutique that they would be a flush/aggressive fit and Ben@WheelsBoutique knows his wheels. The setup only has 900 miles on it =).
The specs are: 22x10 on 295/30/22 and 22x12 on 335/30/22.
Wheels should arrive in a day or two and are already balanced with TPMS. I'm planning on painting the brake calipers as they look like someone took an aggressive cleaner to clean them and they factory paint/coating looks yellow and tarnished.
Thanks for the help!
Trending Topics
The Best of Mercedes & AMG



